Ford Explorer Sport Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Ford Explorer Sport Mass Airflow Sensor Replacement is $296 with $201 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Ford Explorer SportV6-4.0LService typeMass Airflow Sensor ReplacementEstimate$517.31Shop/Dealer Price$627.89 - $937.13
2003 Ford Explorer SportV6-4.0LService typeMass Airflow Sensor ReplacementEstimate$497.31Shop/Dealer Price$607.91 - $917.16
2002 Ford Explorer SportV6-4.0LService typeMass Airflow Sensor ReplacementEstimate$497.31Shop/Dealer Price$607.91 - $917.16
Show example Ford Explorer Sport Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(31)

Rating Summary
31
0
0
0
0
31
0
0
0
0

Randy

20 years of experience
68 reviews
Randy
20 years of experience
Explorer Sport 2001 - Intake Manifold Gaskets - North Fort Myers, FL
The mans knows his beans. And explains things well. I’d go to no one else

Scott

30 years of experience
531 reviews
Scott
30 years of experience
Explorer Sport 2003 - Brake Hose - Commerce City, CO
Scott was excellent again we will be having him service all of our vehicles from here on out.

Gustavo

15 years of experience
303 reviews
Gustavo
15 years of experience
Explorer Sport 2002 - Stabilizer Bar Links - Universal City, TX
He was very professional and explained everything thoroughly! Would recommend him to everyone i know!

Christopher

15 years of experience
286 reviews
Christopher
15 years of experience
Explorer Sport 2003 - Valve Cover Gasket - Brandon, FL
Christopher was awesome. Prompt, great communication and does great work. Highly recommended.

Excellent Rating

(31)

Rating Summary
31
0
0
0
0
31
0
0
0
0
Number of Ford Explorer Sport services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle Body Temp Sensor
Common signs include poor engine performance, stalling, and broken electrical connections.
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...
How Long Does a Speedometer Sensor Last?
While While a mechanical speedometer will use a speedometer cable attached to the driveshaft and transmission, that’s not the case with an electronic speedometer, such as is used in most modern vehicles. These use a speedometer sensor. It’s mounted to...

ABS, CEL lights on

If the ABS light is not illuminated, then it's likely operating correctly as it generally illuminate when a fault is present. The leaking of the battery is a cause of concern. It signifies one of two issues: a damaged battery...

Car won't start but will turn over - 2007 Volvo S40

Hi there. If the belt broke, then it may have damaged some of the wiring. When the belt breaks, it can hit the wiring going to the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) which will keep the vehicle from starting. I usually...

Cant get my car out of limp mode or "fail safe mode"

The reason "limp mode" has become "unbypassable" is due to the existing codes. The ECT failure (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement), if it exists, may alone account for that because an engine coolant temperature sensor is essentially a master sensor - the value of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com