Ford Crown Victoria Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(226)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(226)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Ford Crown Victoria Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1992 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1995 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 Ford Crown VictoriaV8-4.6LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Crown Victoria Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(226)

Rating Summary
209
9
2
1
5
209
9
2
1
5

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Ford Crown Victoria V8-4.6L - Axle / CV Shaft Assembly Replacement (Driver Side Rear) - Culver City, California
Extremely knowledgeable and did great work on a complicated job.

Carlos

28 years of experience
511 reviews
Carlos
28 years of experience
Ford Crown Victoria V8-4.6L - Battery - Diamond Bar, California
Carlos took good care of me, he went above and beyond. I tried to explain to the office personnel I need a specific type of battery and apparently that didn’t matter to them, so I explained to Carlos what the problem was, he went out of his way to take care of it, and get the product I was looking for.

Brandon

18 years of experience
275 reviews
Brandon
18 years of experience
Ford Crown Victoria V8-4.6L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Auburn, Georgia
When I mean phenomenal I mean phenomenal! Quick, responsive and such knowledgeable about my vehicle! Always will request Mr. B

Rodric

14 years of experience
416 reviews
Rodric
14 years of experience
Ford Crown Victoria V8-4.6L - Serpentine/Drive Belt Replacement - Roswell, Georgia
Great mechanic and very nice and knowledgeable!

Excellent Rating

(226)

Rating Summary
209
9
2
1
5
209
9
2
1
5
Number of Ford Crown Victoria services completed
2486+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding All the Drive Belts in Your Car
Your car’s engine has a number of mechanical parts attached to it that perform essential functions like delivering power (the alternator), cooling...
P2043 OBD-II Trouble Code: Reductant Temperature Sensor Circuit Range/Performance
P2043 P2043 code definition Reductant Temperature Sensor Circuit Range/Performance What the P2043 code means This code indicates that the powertrain control module has detected a malfunction with the reductant injector air pressure/temperature sensor. This sensor is used to reduce gases...
P2150 OBD-II Trouble Code: Fuel Injector Group B Supply Voltage Circuit Low
P2150 means there is a poor voltage signal for the fuel injector group B supply, likely due to defective connectors, fuel injector driver, or fuse.

Van shut off while driving, now it won't start

The vehicle may have had a problem with a computer sensor like the crankshaft sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) or camshaft sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-camshaft-position-sensor) but normally they would have put a code into the computer. This is not a common problem and would need...

My key won't turn on to start car

Hi there. It sounds like you either have a worn key or worn key cylinder. Have a new key cut and see if the new key turns the cylinder to start the car. If that does not work, then the...

My car starts up , but the lights on the inside doesn’t want to turn on ,dash lights won’t turn on , not anything would move

The problem of not getting any of the instruments to come on when it starts then you will need to have the ignition switch checked to see if it is sticking or not sending power to cluster.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com