Dodge Intrepid Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(91)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(91)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge Intrepid Valve Cover Gasket Replacement is $388 with $150 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Dodge IntrepidV6-2.7LService typeValve Cover Gasket ReplacementEstimate$610.78Shop/Dealer Price$700.21 - $953.90
1993 Dodge IntrepidV6-3.5LService typeValve Cover Gasket ReplacementEstimate$636.52Shop/Dealer Price$715.92 - $944.64
1993 Dodge IntrepidV6-3.3LService typeValve Cover Gasket ReplacementEstimate$623.88Shop/Dealer Price$720.97 - $1005.11
2003 Dodge IntrepidV6-3.5LService typeValve Cover Gasket ReplacementEstimate$639.48Shop/Dealer Price$726.60 - $979.21
1999 Dodge IntrepidV6-3.2LService typeValve Cover Gasket ReplacementEstimate$639.48Shop/Dealer Price$729.70 - $984.62
2002 Dodge IntrepidV6-3.5LService typeValve Cover Gasket ReplacementEstimate$639.48Shop/Dealer Price$726.90 - $979.72
2004 Dodge IntrepidV6-3.5LService typeValve Cover Gasket ReplacementEstimate$639.48Shop/Dealer Price$726.64 - $979.26
1995 Dodge IntrepidV6-3.5LService typeValve Cover Gasket ReplacementEstimate$636.52Shop/Dealer Price$715.97 - $944.73
Show example Dodge Intrepid Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Dodge Intrepid * - Car is not starting - Riverside, California
Professional and punctual.

David

43 years of experience
220 reviews
David
43 years of experience
Dodge Intrepid V6-2.7L - Car does not shift from park to drive - Marietta, Georgia

Jimmy

30 years of experience
186 reviews
Jimmy
30 years of experience
Dodge Intrepid V6-2.7L - Check Engine Light is on - Charlotte, North Carolina
Excellent. ..

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Dodge Intrepid V6-2.7L - Transmission fluid is leaking - Peoria, Arizona

Excellent Rating

(91)

Rating Summary
81
2
3
0
5
81
2
3
0
5
Number of Dodge Intrepid services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Get Pre-Approved for a Car Loan
Pre-approved car loans make buying a new car easier. Apply for a car loan before you begin car shopping so you can get the best rate and deal.
How to Strip Paint From Your Car
While While you may be able to apply a new coat of paint (https://www.yourmechanic.com/article/how-to-paint-a-car-yourself) to your car the way it is, stripping the old paint off first will yield better results. This task takes time and effort, and several options...
How to Troubleshoot a Slipping Clutch
There are numerous advantages to operating a vehicle with a manual transmission; many drivers claim it gives them more control over...

My car stalled while driving and will not start.

Hi there. Do any warning lights come on when turning the key? If not, then the battery is discharged. If they do, then there are other possible causes to your no start condition that require proper inspections to diagnose. A...

Truck starts and runs rough for about 30 seconds, then dies like it is out of fuel. It won'the restart for 15 minuets

Hey there: If the injector control pressure sensor (https://www.yourmechanic.com/services/injector-control-pressure-sensor-replacement) is faulty, you should have received an error code or check engine light warning code that triggered that light on the dashboard. Try downloading all error codes first as it could...

2011 ford escape gear shift wont more from park to drive from time to time.

Hi there. The interlock solenoid in the shifter housing is not working and is causing the shifter to stay locked in the park position. This solenoid works with the brake switch. Check the brake switch and see if there is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com