Dodge D250 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(89)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(89)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Dodge D250 Wheel Bearings Replacement is $163 with $23 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Dodge D250V8-5.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$244.34Shop/Dealer Price$270.28 - $339.98
1990 Dodge D250L6-5.9L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$308.33Shop/Dealer Price$333.41 - $402.48
1993 Dodge D250V8-5.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$235.33Shop/Dealer Price$259.52 - $327.92
1990 Dodge D250V6-3.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$308.33Shop/Dealer Price$333.45 - $402.54
1992 Dodge D250L6-5.9L Turbo DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$308.33Shop/Dealer Price$335.66 - $406.41
1993 Dodge D250V6-3.9LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$191.97Shop/Dealer Price$205.46 - $241.45
1992 Dodge D250V8-5.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$235.77Shop/Dealer Price$249.70 - $286.01
1992 Dodge D250V8-5.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$308.33Shop/Dealer Price$333.45 - $402.54
Show example Dodge D250 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(89)

Rating Summary
85
1
0
0
3
85
1
0
0
3

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Dodge D250 V8-5.9L - Serpentine/Drive Belt - Austin, Texas
Very friendly. Did a great job and fast.

Ronald

42 years of experience
519 reviews
Ronald
42 years of experience
Dodge Grand Caravan V6-3.3L - Wheel Bearings Replacement (Driver Side Front) - Houston, Texas
Ronald was very friendly and knowledgeable. He fixed up my car quickly and without issue, I’d recommend him and your mechanic to anyone

John

33 years of experience
1126 reviews
John
33 years of experience
Dodge Nitro V6-3.7L - Wheel Bearings Replacement (Passenger Side Front) - Houston, Texas
Very knowledgeable, fast and stands behind his work.

Refugio

18 years of experience
51 reviews
Refugio
18 years of experience
Dodge Ram 1500 V6-3.9L - Wheel Bearings Replacement (Passenger Side Front) - San Antonio, Texas
Refugio was prompt, courteous and offered honest opinions but did not try to push additional services. Refugio came to me, not me to his shop. What a great idea. He completed the work in a timely manner. I would recommend Refugio and Your Mechanic.com to anyone needing auto repairs.

Excellent Rating

(89)

Rating Summary
85
1
0
0
3
85
1
0
0
3
Number of Dodge Wheel Bearings Replacement services completed
979+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Replace a Steering Angle Sensor
A steering angle sensor fails if the Traction Control Light illuminates, the steering wheel feels loose, or the vehicle drives differently.
Symptoms of a Bad or Failing Horn
If the horn doesn't sound right or makes no sound, or if even just one horn stops working, you should get the horn replaced.
How to Apply a Custom Dashboard Sticker
Sometimes Sometimes the dashboards that come with your car can appear bland and uninteresting. Customized dashboard sticker kits are a great option for you if you are looking to give your interior a temporary new style. This guide will show...

Cooling

You may just have a cap that is leaking pressure. Coolant systems are designed to work under pressure, and if the coolant overflow bottle is leaking or the cap is not holding pressure, then it will release coolant. The most...

Does using heat burn extra fuel?

Hey there. The heater in the car only requires the use of the heater blower to blow hot air out of the heater case. The heat is generated by blowing hot air across the heater core inside the A/C blower...

Where is located PCV valve on Nissan Altima GXE 1999, 2.4l. How to replace it?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com