Chevrolet V3500 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,266)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,266)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chevrolet V3500 Transfer case fluid is dirty Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V3500V8-6.2L DieselService typeTransfer case fluid is dirty InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
1989 Chevrolet V3500V8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1990 Chevrolet V3500V8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1991 Chevrolet V3500V8-6.2L DieselService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
1991 Chevrolet V3500V8-5.7LService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
1990 Chevrolet V3500V8-7.4LService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1989 Chevrolet V3500V8-7.4LService typeTransfer case fluid is dirty InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
1991 Chevrolet V3500V8-7.4LService typeTransfer case fluid is dirty InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example Chevrolet V3500 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288

Enrique

21 years of experience
244 reviews
Enrique
21 years of experience
Chevrolet Aveo5 L4-1.6L - Car is not starting - Loughman, Florida
Enriques was so good at his job that I will always now call your mechanic (for My Mechanic Enriques). Thank You, My car is running as well as when I bought it.

Jason

15 years of experience
344 reviews
Jason
15 years of experience
Chevrolet Cruze L4-1.8L - Car is not starting - Jersey City, New Jersey
Excellent service

Ernest

12 years of experience
17 reviews
Ernest
12 years of experience
Chevrolet Malibu V6-3.1L - Fuel Pump - Greensboro, North Carolina
Ernest arrived early and performed the needed repairs successfully. He recommended other needed services and help diagnose other problems that arose before he left. He was professional and courteous throughout his time here.

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Chevrolet Malibu L4-2.4L - Power door locks are not working - Burtonsville, Maryland
My experience with your mechanic Damian was excellent. He was very knowledge above the problem that I was having with my 2012 Chevy Malibu.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288
Number of Chevrolet services completed
167926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

3 Essential Things to Know About Snow Tires and Snow Chains
Snow Snow tires are made to grip on wet, snowy roads. Snow tires are also made of higher quality than regular all-season tires. Snow chains go over the tires of the vehicle to provide more traction while driving through snow...
P2423 OBD-II Trouble Code: HC Adsorption Catalyst Efficiency Below Threshold Bank 1
P2423 P2423 Code Definition A P2423 code is a generic powertrain code related to emissions systems problems. In this case, the hydrocarbon adsorption and catalyst efficiency is below the allowed threshold in engine bank 1 (typically the number 1 cylinder)....
P0346 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Range/Performance (Bank 2)
P0346 P0346 code definition The appearance of the P0346 code indicates that the PCM has detected an incorrect voltage or waveform reading from the engine bank 2 camshaft sensor A camshaft position sensor circuit. What the P0346 code means The...

Airbag light remains on.

This indicates there is a problem in the supplemental restraint system (SRS).The clockspring is one of the most common points of failure on these vehicles, but there are countless other potential causes. The problem could be anything from an faulty...

How many bushings are required for each control arm?

Hello - control arms (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-control-arm-assembly) usually have 2 bushings, but sometimes only 1 - depends on the suspension design. If you could provide the year, make and model of the vehicle, and whether it is for the front or rear...

Thin metal rattle noise from front

If a brake shield (aka "dust shield") is loose, or you suspect brake or wheel bearing noise, please simply request a brake noise diagnostic - rattling (https://www.yourmechanic.com/services/squealing-noise-from-brakes-inspection) and a certified mechanic will be dispatched by YourMechanic (https://www.yourmechanic.com) to evaluate your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com