Chevrolet Lumina APV Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(42)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Chevrolet Lumina APV Throttle Body Replacement is $562 with $422 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet Lumina APVV6-3.1LService typeThrottle Body ReplacementEstimate$1965.92Shop/Dealer Price$2418.74 - $3768.27
1994 Chevrolet Lumina APVV6-3.8LService typeThrottle Body ReplacementEstimate$1280.29Shop/Dealer Price$1562.23 - $2403.52
1993 Chevrolet Lumina APVV6-3.8LService typeThrottle Body ReplacementEstimate$1280.29Shop/Dealer Price$1562.26 - $2403.57
1992 Chevrolet Lumina APVV6-3.1LService typeThrottle Body ReplacementEstimate$1956.01Shop/Dealer Price$2406.91 - $3755.00
1996 Chevrolet Lumina APVV6-3.4LService typeThrottle Body ReplacementEstimate$990.31Shop/Dealer Price$1204.72 - $1840.46
1991 Chevrolet Lumina APVV6-3.1LService typeThrottle Body ReplacementEstimate$1956.01Shop/Dealer Price$2407.06 - $3755.28
1994 Chevrolet Lumina APVV6-3.1LService typeThrottle Body ReplacementEstimate$1941.41Shop/Dealer Price$2392.14 - $3740.11
1993 Chevrolet Lumina APVV6-3.1LService typeThrottle Body ReplacementEstimate$1956.01Shop/Dealer Price$2406.91 - $3755.00
Show example Chevrolet Lumina APV Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(42)

Rating Summary
38
1
1
1
1
38
1
1
1
1

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Chevrolet Lumina APV V6-3.1L - Starter - Shawnee Mission, Kansas
Called when he running behind. Very professional and stuck with a difficult problem until finished. Would I use him again? A definite yes!

John

21 years of experience
650 reviews
John
21 years of experience
Chevrolet Cruze L4-1.4L Turbo - Throttle Body - Winter Garden, Florida
He was there on time and very knowledgeable. Would happily hire him again

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Chevrolet Impala V6-3.9L - Throttle Body - Charlotte, North Carolina
Jeffry was friendly and super helpful. An all around gem of a person, even though there appeared to be more bigger issues with the car he was able to tell me what my next steps should be. Soooooo helpful, and soooo thankful for all of his assistance

Robert

28 years of experience
333 reviews
Robert
28 years of experience
Chevrolet Cobalt L4-2.2L - Throttle Body - Washington, District of Columbia
Very knowledgeable and professional.

Excellent Rating

(42)

Rating Summary
38
1
1
1
1
38
1
1
1
1
Number of Chevrolet Throttle Body Replacement services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Obtain a G1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be a G1 Maintenance and Light Repair Technician.
Is it Safe to Drive With an Exhaust Leak?
Your vehicle’s exhaust system keeps the car quiet and the exhaust fumes away from the cabin. Furthermore, the system helps...
How to Register a Car in Arkansas
All All vehicles in Arkansas need to be registered through the Office of Motor Vehicles (OMV). If you have just purchased a vehicle, or have just moved to the state, your vehicle needs to be registered within 30 days. Registration...

Hi, I have an 06 mazda 3 and it will start and idle just fine but when I press the accelerator down, it won't even rev up.

Hi there. There could be a fuel volume issue (meaning the amount of fuel is not adequate) or the MAF (mass air flow) sensor is dirty or not working. Check the fuel pressure and make sure that there is at...

Engine stalls in gear at stop light

This can happen for a few different reasons and is usually related to things like the idle control valve or the MAP sensor. I would suggest checking the MAP sensor (https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement) as this would seem to have more impact on...

I have a 1995 Lincoln Towncar which won't turn all the way off.

The ignition switch is a darned good place to start. A 1995 car should be pretty straightforward electrically. There may be one or two power relays that could be suspect. The only way to tell for sure is a point...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com