logo

Chevrolet K2500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(33)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet K2500 Control Arm Assembly Replacement is $183 with $43 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet K2500V8-5.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1038.76Shop/Dealer Price$1263.30 - $1928.82
1993 Chevrolet K2500V8-6.2L DieselService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$231.69Shop/Dealer Price$254.95 - $320.60
1996 Chevrolet K2500V8-5.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$231.69Shop/Dealer Price$254.97 - $320.64
1994 Chevrolet K2500V8-5.7LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$595.88Shop/Dealer Price$661.71 - $849.18
1993 Chevrolet K2500V6-4.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$595.88Shop/Dealer Price$665.25 - $855.37
1990 Chevrolet K2500V6-4.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1029.75Shop/Dealer Price$1252.69 - $1917.01
1997 Chevrolet K2500V8-5.7LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$231.69Shop/Dealer Price$254.99 - $320.67
1995 Chevrolet K2500V8-5.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$231.69Shop/Dealer Price$254.97 - $320.64
Show example Chevrolet K2500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Chevrolet K2500 services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(33)
Rating Summary
33
0
0
0
0
33
0
0
0
0

Abdoulie

5 years of experience
29 reviews
Request Abdoulie
Abdoulie
5 years of experience
Request Abdoulie
by Louis
Chevrolet K2500 V8-5.7L - Starter - Roseville, Michigan
Very nice person basically left him alone to do his job since im self employed I appreciate that he came and fixed my truck in a professional manner was pleased with the repair will be using your services more often now that inknow I can trust your company to do the job right the first time and the warranty on the work is good no complaints at all

Michael

22 years of experience
391 reviews
Request Michael
Michael
22 years of experience
Request Michael
by Andrew
Chevrolet K2500 V8-5.7L - Fuel Pump - Azusa, California
Excellent service.

Thomas

12 years of experience
38 reviews
Request Thomas
Thomas
12 years of experience
Request Thomas
by Brian
Chevrolet K2500 V8-5.7L - Starter - Downingtown, Pennsylvania
He did a great job.

Joe

16 years of experience
453 reviews
Request Joe
Joe
16 years of experience
Request Joe
by stephen
Chevrolet K2500 V8-7.4L - Car is not starting - Franklin, Tennessee
located problem very quickly. Professional and nice.

Excellent Rating

(33)
Rating Summary
33
0
0
0
0
33
0
0
0
0
Number of Chevrolet K2500 services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Install an Aftermarket Air Intake
Trying Trying to squeeze more performance out of your car can be an expensive and serious undertaking. Some modifications can be simple, while others can require that the entire engine be disassembled or the suspension be completely rebuilt. One of...
Read more
B1985 OBD-II Trouble Code: Seat Switch Lumbar Deflate Circuit Failure
B1985 means there the switch lumbar deflate circuit is bad. This is most likely due to a faulty circuitry in the part.
Read more
P0588 OBD-II Trouble Code: Cruise Control Vent Control Circuit High
P0588 means an issue with the cruise control vent control circuit, caused by a faulty vent control solenoid or damage cruise control circuitry.
Read more

Vibration and high idle when i cold start it

A high idle upon cold start is generally normal for any vehicle as this is part of the cold start enrichment process as the engine warms up. As a general rule, car engines do not like cold weather and do...
Read more

Oil leaking from back of motor.

Hi Grace. We answered the previous question for you, but in case you didn't receive the message, here is what we sent. It’s quite possible that this is a rear oil seal or oil pan gasket that is leaking; or...
Read more

O/d light blinking car wont accelerate

Hi Valerie. Thanks for contacting us tonight. When you have electrical fuses that continually blow, it means you have an electrical short or an open electrical relay that is the root issue. The best way to determine where the fault...
Read more
  1. Home
  2. Estimates
  3. Chevrolet
  4. K2500
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE