Chevrolet Bolt EUV Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,021)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,021)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Chevrolet Bolt EUV Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Chevrolet Bolt EUVElectricService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Chevrolet Bolt EUV Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,021)

Rating Summary
14,070
472
110
84
285
14,070
472
110
84
285

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Chevrolet Aveo5 L4-1.6L - Clutch is not fully disengaging - Seattle, Washington
Noe was honest, forthright an very knowledgeable. Great work and I would highly recommend him.

Jerry

8 years of experience
136 reviews
Jerry
8 years of experience
Chevrolet Impala V6-3.4L - Cooling System Flush - Lawrenceville, Georgia
Very professional and thorough

Nicholas

11 years of experience
303 reviews
Nicholas
11 years of experience
Chevrolet Sonic L4-1.8L - Oil is leaking into spark plug well Inspection - Conroe, Texas
Very helpful

Wesley

16 years of experience
277 reviews
Wesley
16 years of experience
Chevrolet Malibu L4-2.4L - Check Engine Light is on - Denver, Colorado
He was very helpful and friendly

Excellent Rating

(15,021)

Rating Summary
14,070
472
110
84
285
14,070
472
110
84
285
Number of Chevrolet services completed
165231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Can Bad Wipers Damage or Scratch the Windshield?
Driving Driving with wiper blades that aren’t clearing properly can be more than just frustrating; it can be dangerous. Streaks and sections that don’t clear can obstruct your clear view of the road. Normally this is caused by bad wiper...
How to Tint Your Tail Lights
The The car that you drive is a reflection on your personality. If something on your car doesn’t quite fit the mold, you can customize it so that it suits you better. Car modification is a big business. Companies produce...
How to Prepare for the Nevada Driver’s Written Test
You You are probably excited about the prospect of driving and taking to the open road. There’s nothing quite like that feeling of freedom. However, you have to realize that driving means you need to be responsible and that you...

Rear main seal leaking

Hi. Being a car that is over 20 years old you are probably going to need a new transmission. A technician from YourMechanic can come out and replace the Speed sensor (https://www.yourmechanic.com/services/transmission-speed-sensor-replacement) and see if that fixes the issue. If...

Do I need to replace the engine fuse box or is there and easier fix that is less expensive?

The different models for those two years are not interchangeable for fuse box swaps. Your only way to fix the problem is to replace the fuse box (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse-box) if the pins cannot be tightened up. If you need some assistance...

Lexus IS 250 2010 electrical problems

I have checked all the recalls and technical bulletins for this vehicle and there are no known issues that can cause the battery to go dead in 3 three days. I would suggest you observe the vehicle in the dark...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com