Buick Century Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(324)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(324)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Buick Century Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Buick CenturyV6-3.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1986 Buick CenturyV6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Buick CenturyV6-3.1LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Buick CenturyL4-2.2LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1973 Buick CenturyV8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1979 Buick CenturyV6-3.8L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1974 Buick CenturyV8-7.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1987 Buick CenturyV6-3.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Century Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(324)

Rating Summary
301
20
0
2
1
301
20
0
2
1

Joseph

18 years of experience
115 reviews
Joseph
18 years of experience
Buick Century V6-3.1L - Windows - Bel Air, Maryland
Good

David

16 years of experience
635 reviews
David
16 years of experience
Buick Century V6-3.1L - Windows - Sacramento, California
Although arrived late David easily got to the source of the problem. Nice guy. Gave advice on what I should get to fix my current problem real fast and quick. Made recommendations on what I should get fixed on my vehicle at my own pace for future references he was very informative. Great job.

Chuy

14 years of experience
398 reviews
Chuy
14 years of experience
Buick Century V6-3.1L - Drive Belt Tensioner - Blue Island, Illinois
Prompt, knowledgeable and personable

Russell

27 years of experience
271 reviews
Russell
27 years of experience
Buick Century V6-3.1L - Car is not starting - Oakland, California
Russell is a Very Cool Person all around good guy.

Excellent Rating

(324)

Rating Summary
301
20
0
2
1
301
20
0
2
1
Number of Buick Century services completed
3564+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Drive Safely without Mirrors If You Have To
Your Your car has mirrors for a very good reason: you need to see behind you and beside you at all times, or your safety is compromised. You’ll also be a threat to other people on the road. But what...
How to Buy Good Quality Long Range Car Lights
Your Your car is equipped with two types of headlight functionality – low beams, which are used for general driving, particularly in areas with streetlights and oncoming traffic, and high beams, which provide long range illumination. Buying quality long range...
P006A OBD-II Trouble Code: Manifold Absolute Pressure (MAP) - Mass or Volume Air Flow Correlation
P006A means there is a signal correlation problem between the engine computer and MAF or MAP sensor, likely due to a faulty intake system or sensor.

What Is Included in an Engine Inspection?

Engine inspections are an integral part of any engine repair or diagnostics visit. They can also be a separate visit to get a general condition of an engine, like in a pre-purchase inspection (https://www.yourmechanic.com/services/pre-purchase-car-inspection) or a safety check inspection (https://www.yourmechanic.com/services/75-point-safety-inspection)....

evap. purge solenoid valve?

Hello, testing the EVAP purge solenoid can be relatively simple, with the right tools and knowledge. A technician such as those we have here will have the right tools, but I will provide you with the right knowledge. Testing the...

Cold start issue.starts after few cranks after sitting idle for 15 hours.starts immediately after 10 hours.New battery & starter

Your engine has variable valve timing and uses oil pressure to work this system in the engine. It will not work correct and can cause starting issues if you are not using the correct 5w30 oil in the engine. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com