BMW 550i GT Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a BMW 550i GT Fuel Injector Replacement is $3177 with $1567 for parts and $1610 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$5009.98Shop/Dealer Price$5869.83 - $8277.86
2012 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$5552.76Shop/Dealer Price$6538.16 - $9406.99
2013 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$5579.34Shop/Dealer Price$6571.92 - $9461.09
2015 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$4900.96Shop/Dealer Price$5723.91 - $8104.27
2010 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$5552.76Shop/Dealer Price$6569.87 - $9462.48
2011 BMW 550i GTV8-4.4L TurboService typeFuel Injector ReplacementEstimate$5465.17Shop/Dealer Price$6451.95 - $9321.83
Show example BMW 550i GT Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Jesse

18 years of experience
219 reviews
Jesse
18 years of experience
BMW 550i GT V8-4.4L Turbo - Control Arm Assembly Replacement (Front Lower Left) - San Antonio, Texas
Took time to explain what was going on with my car and gave me an honest assessment of the issue. Was very kind and professional!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
BMW 550i GT V8-4.4L Turbo - Spark Plugs - Menifee, California
Are usually never do these reviews but this is an exception. Chriss was very punctual something that us military can appreciate and very professional. Answered any and all my questions while still performing his job in the utmost matter! After he was finished he went over everything done and even pointing out other things going above and beyond The scope of what he was here to do ! I know my vehicle was in great hands!

Frank

41 years of experience
57 reviews
Frank
41 years of experience
BMW 550i GT V8-4.4L Turbo - Pre-purchase Car Inspection - Marietta, Georgia
Frank was on time, provided a detailed report quickly and even answered some questions. I couldn't have asked for more.

Ricardo

15 years of experience
339 reviews
Ricardo
15 years of experience
BMW 550i GT V8-4.4L Turbo - Coolant is leaking - Redondo Beach, California
Very knowledgeable. Thorough. Great explanations.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of BMW 550i GT services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Apply Reflective Tape to Your Car
Applying Applying reflective tape to your car or truck is an inexpensive way to customize (https://www.yourmechanic.com/article/how-to-customize-a-car) it, allowing it to stand out from the crowd. The process is also simple enough that most people can do it themselves, saving the...
How Long Does an Oil Pan Last?
The The oil that is contained in your engine is helps to lubricate all of the moving parts that your motor has. Making sure that the oil stays at the right levels should be one of the top concerns that...
What Is My TPMS Light For?
Have Have you ever looked at your tires in the parking lot and wondered if one was lower than the others? Did you brush that thought off, thinking it must be your imagination or the way the car is sitting?...

Loss of power

Hi there, thanks for writing in. Most of the time this is caused by a fuel system issue. I typically check the fuel pressure first. If the pressure is low, then the pump is bad (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump). If the pump is...

Codes po102 103 113

Hi there: It's very difficult to tell you where to start if we don't know what type of troubles or symptoms you're experiencing. A professional mechanic typically will download OBD-II trouble codes first, then test drive or communicate with the...

My honda civic 2008's car AC stopped working and is creating rattling sound. when inspected by a mechanic, it said he need to repl

Hi there. The items you've listed including the condenser and compressor themselves are typically installed by local mechanic shops for $500 to $700 individually. So, the estimate you've listed for all of that service seems rather fair. As long as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com