BMW 328d xDrive Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a BMW 328d xDrive Fuel Injector Replacement is $1930 with $1552 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 BMW 328d xDriveL4-2.0L Turbo DieselService typeFuel Injector ReplacementEstimate$3521.90Shop/Dealer Price$4314.76 - $6655.07
Show example BMW 328d xDrive Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0

Luis

19 years of experience
363 reviews
Luis
19 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Pre-purchase Car Inspection - Somerset, New Jersey
Polite and professional

Trevor

23 years of experience
185 reviews
Trevor
23 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Oil Change - San Diego, California
Trever was on the dot and immediately got to work. After finishing the job and doing the complimentary safety inspection, I had a few questions and he cheerfully and competently answered them.

Brian

24 years of experience
818 reviews
Brian
24 years of experience
BMW 328d xDrive L4-2.0L Turbo Diesel - Oil Change - Jacksonville, Florida
Brian was knowledgeable on time a friendly.

Marco

30 years of experience
329 reviews
Marco
30 years of experience
BMW 328i L6-2.8L - Fuel Injector - Chino, California
Did fuel injector replacement and helped with a vacuum leak, thank you for your help!

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0
Number of BMW Fuel Injector Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0057 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0057 P0057 trouble code definition P0057 is a code that sets when the powertrain control module senses that the voltage is low on the bank 2 sensor 2 oxygen sensor. What the P0057 code means When a P0057 trouble code...
How a Car's Heating System Works
The The sun sets, and the air has a chill. You pause to flip your jacket collar up, and you walk briskly to your car door and slide into the driver's seat. Once you start your car, it’s only moments...
A Buyer’s Guide to the 2012 Chevrolet Cruze
Until Until just the past few years, the Toyota Corolla and the Honda Civic were the kings of the compact car class, and domestic manufacturers had almost nothing in the way of competition for these models. With the 2012 Chevrolet...

Cruise control not working

Hi. There are quite a few things that could be causing this issue. The control switch position is sent to the steering angle sensor via the clockspring in the steering column. Then the steering angle sensor sends the cruise control...

transmission not in park

Hi there. What gear does it show when this occurs? Place the shifter in neutral and apply the parking brake, turn off the engine. Is the check engine light on? This could be a shifter concern, interlock switch concern, gear...

Goodafternoon, my hummer h3 idles, shakes and trembles when its in park and while driving. make a huge sound while turning it on and takes forever to turn on as well. Traction failed light turns on

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com