Audi A3 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(148)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(148)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Audi A3 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2007 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Audi A3L4-2.0L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2010 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2018 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Audi A3L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2015 Audi A3L4-2.0L Turbo DieselService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Audi A3 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(148)

Rating Summary
139
5
3
0
1
139
5
3
0
1

Khoa

20 years of experience
402 reviews
Khoa
20 years of experience
Audi A3 L4-2.0L Turbo - Oil Change - Redwood City, California
got the job done

Rafael

27 years of experience
74 reviews
Rafael
27 years of experience
Audi A3 L4-2.0L Turbo - Oil Change - Crockett, California
Rafael's work was right on. Changed the oil & filter and told me of some issues I was unaware of. Clean. took an hour. Only disappointment: He was delayed on a previous job and was an hour plus late. Somehow YourMechanic through their tracking system, or perhaps Rafael could have let them know. I had to call and find out that the previous appointment was running late and he was delayed. It wasn't an issue this time, and I had no plans until the end of the day, I would have appreciated knowing and understood about repair delays. I have worked on cars for a most of my life.

Tyrone

19 years of experience
105 reviews
Tyrone
19 years of experience
Audi A3 L4-2.0L Turbo - Serpentine/Drive Belt - Houston, Texas

Frank

21 years of experience
12 reviews
Frank
21 years of experience
Audi A3 L4-2.0L Turbo - Oil Change - Los Angeles, California
Great guy and did a great job!

Excellent Rating

(148)

Rating Summary
139
5
3
0
1
139
5
3
0
1
Number of Audi A3 services completed
1628+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0291OBD-II Trouble Code: Cylinder 11 Injector Circuit Low
P0291 P0291 code definition When your vehicle’s PCM registers the P0291 code, it means that a voltage reading came from the fuel injector circuit – for cylinder number 11’s fuel injector – that doesn’t conform to the predetermined value referenced...
P0510 OBD-II Trouble Code: P0510 Closed Throttle Position Switch Malfunction
P0510 means a problem with the vehicle's throttle plate. Some issues are frequent engine stalling, high or low engine idling and trouble accelerating.
10 Best Stores to Buy Auto Parts in Providence, Rhode Island
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Providence is Banchwerks.

Door not opening

If neither the inner or outer door handle will open the door then it is most likely a faulty latch that should be replaced (https://www.yourmechanic.com/services/door-latch-replacement). This can be a difficult repair, as access to the latch will be tricky since...

Where do i fill up the radiator on a H2 Hummer 2006

Coolant on your vehicle should be added to the reservoir that is located on the passenger side of the engine compartment. It will have a cap on top, that can be removed when the engine is cool, and allow for...

How many ignition coils do I need for a 2006 Lincoln zephyr?

Your vehicle has a 3.0 liter engine and has a coil per cylinder. You have a 6 cylinder engine and have 6 coils. You do not need to replace the engine computer.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com