Showing articles & questions for topic
P0130

Hello, thank you for writing in. There is one major issue that is likely causing everything else you are experiencing. This is your fuel system. You need to start by checking and/or replacing your fuel pump. When it gets low,...

For this vehicle with 4.6 or 5.4 liter engine, the code P0130 (https://www.yourmechanic.com/article/p0130-obd-ii-trouble-code-02-sensor-circuit-malfunction-bank-i-sensor-1-by-paul-lancette) could be due to a problem with the computer program calibration. There is a technical service bulletin (TSB) number 13-3-5 dated March 6th 2013. The TSB pertains...

Hi there. The movement of the vehicle when starting the engine and driving in the parking lots would be caused by an engine or transmission mount or both. Check the mounts and see if any of them are broken from...

The code (https://www.yourmechanic.com/article/p0130-obd-ii-trouble-code-02-sensor-circuit-malfunction-bank-i-sensor-1-by-paul-lancette) is for the oxygen sensor not putting out enough voltage, causing the vehicle to run rich all the time since the computer thinks it is running lean until the computer reaches its rich limit. Check the oxygen...