Best Prices for Brake Drum Replacement

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(148)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(148)

How much does Brake Drum Replacement cost?

It depends on the type of car you drive and the auto repair shop you go to. Our mechanics are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office.

Brake Drum Replacement pricing for various cars

CarsEstimateParts CostLabor CostSavingsAverage Dealer Price
2009 Ford Expedition$432$256.56$175.18-11%$385.56
2015 Ford F-150$461$256.56$204.38-13%$407.06
2012 Volkswagen Touareg$567$202.42$364.97-20%$471.17
2015 Infiniti Q60$401$225.76$175.18-13%$354.76
2015 Lexus NX200t$435$230.77$204.38-14%$381.27
2009 Porsche Boxster$899$650.47$248.18-7%$833.22

Brake Drum Replacement Service

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Recent Brake Drum Replacement reviews

Excellent Rating

(148)

Rating Summary
141
4
1
0
2
141
4
1
0
2

Stephen

15 years of experience
19 reviews
Stephen
15 years of experience
Chevrolet Colorado L5-3.7L - Brake Drum - Dallas, Texas
Absolutely just the best. Great work and very efficient. Has a great attitude and is passionate about being "Your Mechanic."

Ronald

42 years of experience
519 reviews
Ronald
42 years of experience
Honda Accord L4-2.4L - Brake Drum - Houston, Texas
Ronald was on time and did a great job. I appreciated how efficiently and quickly he finished the job. I will definitely chose him for future car maintenance and suggest this service to my friends.

Guillermo

16 years of experience
16 reviews
Guillermo
16 years of experience
Chrysler Pacifica V6-3.5L - Brake Drum - Denver, Colorado
Guillermos was very courteous and informative. He keep me updated on his arrival time. Did a great job in a timely manner. Would definitely recommend him

Josten

16 years of experience
17 reviews
Josten
16 years of experience
Dodge Dakota V8-4.7L - Brake Drum - Victorville, California
Josten was on time for every appointment, and stayed as long as necessary to complete his job. He did a very thorough inspection of my vehicle and was totally honest in his findings. He gave me a reasonable estimate for my repairs, and even ended up saving me money and charged me less than the original quote. I HIGHLY recommend Josten to anyone needing a mechanic. I've referred my family to him, and I will definitely hire him again if I need to. Thank you, Josten.

Recent articles & questions

Is it Safe to Drive With a Stuck Caliper?
The caliper is part of the brake assembly which houses the brake pads and pistons. If you have a stuck caliper, the...
How to Get the Most Horsepower Out of Your Car
The The more horsepower (https://www.yourmechanic.com/article/5-essential-things-to-know-about-horsepower) your vehicle has, the faster it can accelerate and pick up speed. Therefore, it is natural to reach a time in a car owner’s life when they may ask themselves how they can assist in...
P2638 OBD-II Trouble Code: Torque Management Feedback Signal 'A' Range/Performance
P2638 P2638 code definition If the Powertrain Control Module (PCM) stores a P2638 trouble code, it indicates that a signal malfunction has been detected in the PCM or one of the other support modules, dealing specifically with the torque management...

How do I use the rear window washer?

The rear window washer gives you added visibility through the rear window by spraying washer fluid on it, and wiping it away. To use this feature, push the wiper lever (located on the right side of the steering column) forward,...

Brake light and turn signal not working

Hi. There could be an issue with the light bulb sockets so they should be inspected for problems. Also, have a certified mechanic make sure the proper power from the multifunction switch in the steering column (Turn signal switch) is...

Transfer case is making a noise.

Hi there. Depending on what type of noise that the transfer case is making, the oil type and amount has a big factor in the transfer case emitting a noise. If the wrong type of fluid is put in the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (844) 997-3624 · hi@yourmechanic.com