Q: What does the Cruise Main indicator light mean?

The engine oil pressure Warning Light is located on the instrument panel. This light illuminates when the oil pressure is low. As soon as you notice this light come on, have your vehicle serviced, or pull over and check the...

Electric seats run on a track with motors that adjust it in the direction you choose. The gears in the motors are sometimes made of plastic. Under normal situations the plastic gears hold up fine, but if there is an...

From your description, it sounds as though the engine is turning over, but it will not start and run. This particular year of F-150 with the 5.0 had many possible causes of a no-start. The distributor ignition module and starter...

Hi, thanks for writing in. Usually this is identifiable by the charging system gauge in your car, which should typically read, at idle, 13.8 to 14.3 volts with no lights or accessories on (although some may charge at a slightly...

Hello. From what you describe it would appear that your vehicle may be experiencing some mild to serious transmission issues. If the Check Engine Light is on I would recommend retrieving the trouble codes, as they will likely shed some...

Your car is relatively new and the mileage is not that high so it's somewhat surprising to hear that it is overheating (https://www.yourmechanic.com/article/what-causes-a-car-to-overheat). You first want to check and be sure the radiator is full and the reservoir (coolant overflow...

Noise of that type is due to a failed or failing bearing in one of the pulleys or accessories (e.g., alternator, water pump, A/C compressor) that is driven by the serpentine belt, the belt is not properly tensioned, or the...

Hi Colton. Thanks for sending in your question. The cost of repairs would depend on what's causing these symptoms. In some cases, it's due to debris being stuck in the transmission, that can be removed by flushing the transmission fluid...

Hi Justin. Thanks for contacting us today. Trouble codes can be caused by multiple issues ranging from component failures or simply sensor or electrical harness connection issues. However, the best way to determine what is causing the codes is to...