Crank, no start. Replaced relays and fixed wiring issue w...
Responses
Chris(aka-Moose)
312 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
- Can I get the year, make, model, and engine?
Customer
312 days ago
I can wait if you'd like. You're like 3 hours ahead of me I'm in California
Chris(aka-Moose)
312 days ago
Whatever works best for you.
Customer
312 days ago
2000 Volkswagen beetle tdi 1.9
Chris(aka-Moose)
312 days ago
Now that I know what this vehicle is. I am not a VW tech. I will opt out so another can help
Customer
312 days ago
Thank you
Chris(aka-Moose)
312 days ago
**Bradley Jordan**
**Nissan, Subaru, and Infiniti Master Technician**
**ASE Master Tech All Makes**
**Let me take a moment to review your request.**
**_You may be prompted for a phone call, this is optional as the request is automatic._**
Chris(aka-Moose)
312 days ago
The code P1156 is the map sensor in the tube by the passenger tube refer to the attached pdf. it is g71 in the picture, is this the one you replaced.
Chris(aka-Moose)
312 days ago
attached are the diagnostic steps for the P1156, complete this diagnosis, you will find a bad, sensor, a wiring issue, or a bad ECM.
Customer
312 days ago
I have a scan tool car is not reading any codes at the moment I addressed the issues tied to the codes. I did screen shot the freeze free info would that be of any help. A lot of it was n/a and the like as it wasn't starting.
Chris(aka-Moose)
312 days ago
I am at the bank go ahead and send it I will look at it when I get home.
Customer
312 days ago
I will when I get done here .I'm at work feeding horses
Chris(aka-Moose)
312 days ago
was that freeze-frame before it quit running or when it would not start?
Customer
312 days ago
I'm not certain the file I sent was actually sent it had multiple pics of info scan had shown and it was while it was not starting at all. I had not the opportunity to use scan beforehand.
Chris(aka-Moose)
312 days ago
Are you sble to view live data while cranking it??
Customer
312 days ago
Live data? Such as what? Sorry for ignorance I'm just not knowledgeable.
Chris(aka-Moose)
312 days ago
A lot of scanners have an option for live data to monitor the computer inputs in real time.
Customer
312 days ago
I am not sure. I'll be over at the car and scanner tomorrow and can check but I want to say no. I dont recall that option
Chris(aka-Moose)
312 days ago
Ok let me knoe
Customer
312 days ago
It started and no engine lt or anything!!!!!
Chris(aka-Moose)
312 days ago
Your magic
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What is the vehicle load limit?
All vehicles have a load limit, which is the amount of combined weight they can safely carry without putting undue strain on the engine and transmission, which can lead to damage. Your car’s load limit is 825 pounds without the...
Ignition column popped out
Hi. It will depend on the damage done. Most likely the steering column is ok, it is the ignition lock cylinder, the housing, and the switch that have probably sustained damage and these items will need to be replaced. My...
Car leaking antifreeze and overheating
If the vehicle isn't overheating you probably just have a coolant leak somewhere. If left unattended however, your vehicle could run out of coolant and subsequently overheat. Overheating can lead to extensive engine damage, so I recommend addressing this issue...
Van starts and then dies
There are several issues that can keep a vehicle from starting, such as mechanical issues like off timing, bent valves, lack of airflow in the intake system, lack of fuel pressure from a failing fuel pump, or possibly a lack...
Hesitates when accelerating
Hello. This can be caused by the catalytic converter, but that is not too common with this symptom. If there is a hopping feeling, which is similar to a misfire, then most of the time this is caused by a...
Acura RDX 2010-check engine oil light
Hi there. The oil smoke seen, should have had a bluish tint and did not quickly dissipate. There are several possibilities for engine oil consumption. The most likely cause for your engine, is a failed oil seal in the turbocharger....
I went to an automatic car wash and 2 minutes after that my car's dashboard flickered and the car died.
You are likely experiencing an electrical short (https://www.yourmechanic.com/services/electric-problems-inspection) of some kind. This is likely due to a wire or electrical component being exposed to the water from the car wash. A number of electrical components will become damaged when exposed...
How long can I leave my truck sitting without it being plugged in before the diesel starts to gel up? Its currently 15 Degrees
To be blunt, there is no specific number that we can give you. You have to understand that diesel fuel gels in colder climates due to the amount, and types, of paraffin wax that is used in the manufacture of...
Why won't my car start after it was ran out of oil and got hot 2009 Chevrolet Impala
Hi there. If the engine was ran this low on oil then it may have seized. This is assuming that it is not cranking. From your explanation I am assuming that it is not cranking since you mentioned the battery....
Browse other content
Cities
Services
Maintenance
Crank, no start. Replaced relays and fixed wiring issue with glow plugs. Put in new starter, replaced melted underhood fuse box, replaced map sensor near intercooler the one behind passenger front turn signal and the infamous rela...
Crank, no start. Replaced relays and fixed wiring issue with glow plugs. Put in new starter, replaced melted underhood fuse box, replaced map sensor near intercooler the one behind passenger front turn signal and the infamous relay 109. It has a new [timing belt](/topics-timing-belt-vw/) kit put on, and egr. STILL THE RAT BASTARD WONT START!!!! No more codes are reading but it wont run so who knows what will read then. Lol I did take screen shots of scan tool freezeframe info. Just in case...... I know it's a lot sorry Mechanic's Assistant: How many miles are on the timing belt? Have you ever had to change it before? No miles at all did it while its been just sitting It quit running about six weeks ago now Mechanic's Assistant: What year is your Relay? Prior I had had to spray wd40 in maf and get a jump at the same time. It would start hard start for sure when running it's a great car no issues other than original codes p1156 and 0380 Mechanic's Assistant: Are you fixing your Relay yourself? What have you tried so far? My relay year???? Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? What relay????