My 2015 jetta was driving fine, was driving home from wor...


My 2015 jetta was driving fine, was driving home from work and the epc light traction control light came one and engine light keeps flashing. There is no one that works on Volkswagens for 60 miles from me. Help Mechanic's Assi...

My 2015 jetta was driving fine, was driving home from work and the epc light traction control light came one and engine light keeps flashing. There is no one that works on Volkswagens for 60 miles from me. Help Mechanic's Assistant: Do you know the code? Did you check the fuses? No. I don’t have a scanner but the auto parts store has one and where are the fuses? Mechanic's Assistant: Are you fixing your Jetta yourself? What have you tried so far? I want to fix it myself and I haven’t done anything yet. I don’t know where to start Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? It is sputtering like it is running very rough

Automotive Expert
Hello and thanks for your question. My name is \*\*\*\*\* \*\*\*\*\* I will do all I can to help. How many miles are on it now roughly? thank you.

Ok thank you. My name is Beth.

117500 miles
Automotive Expert
Hello Beth, Alright, most likely the problem is due to spark plugs, or coil packs, or a combination of both, as the engine is likely misfiring causing the rough running and blinking check engine light. Any local independent shop should be able to handle that repair in my opinion. If you have one closer than 60 miles to you. It's not a overly hard job on this engine.

Ok so is it difficult to change the spark plugs? Where are they located? If it's the coil packs can I do that too?
Automotive Expert
I would start with the plugs first, if you stop by a local auto parts store they can scan it to double check my theory, but at that mileage it's likely either coil packs or plugs or combination of both. But I would start with the spark plugs first.

Ok. So can I just text this number back after I have it scanned?
Automotive Expert
Coil packs are on top of the engine, under the cover, right up top. You'll need basic hand tools and a 5/8 plug socket to get them out. Yes, you can come back here and type in this chat box and I will respond asap later if you need to ask anything else. Thank you!

Ok. Thank you!!
Automotive Expert
Absolutely!

What others are asking

Blower not blowing strong
Hi there. Check your cabin air filter as they get dirty very quickly. Open the hood and check the cowl area for debris which is where the air is brought in for your blower. Cycle the mode door through every...
Engine rumbles and vibrates while idling
You might want to try watching my video "How to Fix a Car That Idles Poorly (https://www.youtube.com/watch?v=eQpPcdvSBks)." You just take the plastic plenum that goes from the air filter to the intake and get some throttle body cleaner. Spray the...
What would cause brand new O2 sensors to give codes 172, 173, 176, and 177, rich and lean conditions, both sides at the same time?
When it comes to across-the-board codes being set such as this, it is usually a result of something "upstream" creating the condition to set all these codes. For instance, it is rare for both O2 sensors to fail at exactly...
VVT (variable valve timing) Solenoid and Check Engine Light codes P0300 and P0011
Hi there. Through your research you probably discovered that there are multiple causes of a rough idle and the Check Engine Light beyond the VVT solenoid (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-variable-valve-timing-vvt-solenoid). If you replace the second bank solenoid, it may improve your issue, but...
The car starts to stall when I accelerate at high speed.
I would first check to see if the PCM has set any diagnostic trouble codes, including pending codes. Codes can be downloaded and evaluated by YourMechanic (http://www.yourmechanic.com) in the context of a Check Engine Light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). The camshaft and...
loud, vibrating noise coming from underneath.
Hi there. Sounds like the exhaust heat shields are loose on the exhaust system and rattling underneath the vehicle. Go under the vehicle and check to see which shield is vibrating and tighten them up. If the heat shield (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection)...
Which 02 sensor do you replace if you're getting bad gas mileage
Hi there. That's a very good question. The one you replace is the one that is faulty, as both sensors work together to take measurements and reading of the fuel system and exhaust to fine-tune the fuel to air ratio....
I can't remove rear wiper blade arm in my 2008 Ford Escape
Hi there. If you need some assistance replacing your rear windshield wiper on the Ford Escape, one of our mobile mechanics would be more than happy to assist. Simply click this link to request a price on windshield wiper blade...
Replace throttle body 2010 ford fusion hybrid
Prior to replacing the throttle body, you should go through the Ford diagnostic procedure in the Factory Service Manual for this part to ensure that you do not replace a perfectly good part. The removal procedure is to first remove...