Po191, just travelled 120.mile in the snow, 30-45 mph, st...
Responses
Kurt Mulling
261 days ago
Hello, my name is \*\*\*\*\* \*\*\*\*\* I'm sorry your having problems with this vehicle so I'll try to help you with this issue.The website may prompt if you want a call, but that would be up to you. So I see the codes , however I don't know the yr. make, model and engine size of the car, so It would help to know that so I can be looking at the right info.
Customer
261 days ago
Range rover sport 2009 model. V6 diesel. 2.7Range rover sport 2009 V6 2.7 diesel
Kurt Mulling
261 days ago
Sorry I don't have that info , so I'll opt out for someone else to try, but it would also help to know where the car was built ?
Customer
261 days ago
Not sure... I'm british
Kurt Mulling
261 days ago
Ok so we don't have that model in the States so I'll opt out.
Kurt Mulling
261 days ago
Hi my name is \*\*\*\*\* \*\*\*\*\* am here to help you Today P0191 relates to fuel rail pressure sensor abnormal fuel pressure just going to look at the P140e code.
P140e is a code related to the EGR valve i would focus on the low fuel pressure code first.
Customer
261 days ago
HiWould that be electrical or fuel filterBattery is now flat
Kurt Mulling
261 days ago
What is the situation i take it you are stuck at a service station.
Customer
261 days ago
No layby 100 miles from home
Kurt Mulling
261 days ago
Have you got or are you in the AA / RAC.
Customer
261 days ago
may need that tomorrow, I'm 30 mile from my son's and was visiting hom
Kurt Mulling
261 days ago
ok so you are safe / ok. The abnormal fuel pressure needs looking at could just be down to the in tank pump.
Customer
261 days ago
Yeah. Though I do know there is some under lying elec prob occasionally
Kurt Mulling
261 days ago
In what way what has it been doing.
Customer
261 days ago
When I bought the car, the only time that it failed an MOT was due to all lights not bright enough, I have had the vahicle 14 months, this problem has occurred 2 times, but the times it did , I just stopped the engine for 10 mins. This time the problem has occurred and stayed there. The same codes were visible on the past 3 times and then dissapeared
Kurt Mulling
261 days ago
That is a good thing the issue has stayed hopefully then they can find out what module is playing up who has been looking at it for this issue.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
High idling, jumping while idling, idle air control valve code
Hi there. This can be caused by the issues that you mentioned or a number of other things. You need to make sure all of the connectors are making good contact. I would then need to know what codes are...
Advice on installing interior LED lights
I would suggest running your own separate wire system to the battery and keeping the lights separate from any interior systems. The wiring in this vehicle controls everything through modules, and if you tap into the modules, they could cause...
Crank no start
Hey there, thanks for writing in about your 2003 Ford Explorer. It sounds to me like you either have no fuel or bad fuel at the injectors, or no spark to spark plugs. Try to narrow the problem to one...
Clunking noise from rear suspension
It is possible that you could have some play in your rear control arm bushings or rear toe adjustment links. I would recommend having a rear suspension inspection performed by a qualified professional to determine where the noise is coming...
Take key out car jeeps running sometimes. Then as oil and battery light want go off unless u take it slowly out
It seems as if your ignition switch is malfunctioning. Your ignition switch is the part that you stick your key into. This part is responsible for controlling different circuits based on the position of the key. It seems like the...
Ignition switch will not turn on.
Hello and thank you for your question. For this, you will need to disconnect you battery and remove the steering wheel and airbag assembly. In the steering column, you will see where the ignition switch is located and you will...
rattling noise when engine idles. load engine noise during acceleration like glass packed muffler
This may be related to loose exhaust parts such as exhaust mounting brackets, or potentially a bad or failing catalytic converter. As you may know, the catalytic converter has a honeycomb-like structure inside of it which helps to convert toxic...
Service Light is on!!!
Hi there. If you are looking for an explanation of what the codes mean, you can use our search tool (https://www.yourmechanic.com/advice), as we have multiple articles written about OBD-II trouble codes. If you're looking to find a way to download...
Can bad U joints cause engine vibration
Hello, thank you for writing in. The misfire is likely the cause of the vibrations you are feeling. When just one cylinder is having a misfire, you may have a bad spark plug, a weak spark due to a failing...
Browse other content
Cities
Services
Po191, just travelled 120.mile in the snow, 30-45 mph, stopped for coffee and after 1.5 miles, stopped, got gas. Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—...
Po191, just travelled 120.mile in the snow, 30-45 mph, stopped for coffee and after 1.5 miles, stopped, got gas. Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—same as usual? + p140e Mechanic's Assistant: What is the make/model/year of your car? Yes over the past week Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Normally starts on the button. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I carsoft and found two codes an I've given you