Q: Turn signal lights not working.

asked by on January 13, 2016

All lights but the turn signals work.

I believe there was a recall done on the turn signals for your vehicle. You may check with your local dealership and see if this applies to your vehicle. If not, these are cars are known for having faulty turn signal switches and flasher switches. Of course, could be a problem somewhere else in the circuit, such as an open or short. The fuse could be blown, too. If you do find a blown fuse, you’ll need to track down the reason it blew in the first place. I suggest you have your vehicle inspected and repaired by a certified technician, like one from YourMechanic.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Starter not turning
Hi there. If you hear a click, then the first thing I typically do is find where that click is coming from. Most of the time, the clock is the starter trying to engage but it is unable to crank...
How can I get my car to start when the theft system won't allow my key to turn over?
The security chip is designed to keep your vehicle from starting without the owner's key. Unfortunately, you will need to obtain a key (https://www.yourmechanic.com/article/how-to-replace-a-car-key) with a chip and have it programed to the vehicle. A mobile locksmith may be able...
Car won't start - Jeep Liberty
Hi there. From the description you have provided, I assume you have bypassed the ignition switch to determine that the battery and starter are good. If so, and if you are turning the key and only hearing a click, I...
Is it expensive to replace the valve seals?
The usual symptom for bad valve stem seals is bluish white smoke out of the exhaust pipe when the engine is started cold. The smoke usually clears after a minute and doesn't return again until the car is shut off...
How do I know which blend door actuator is affected?
Hi there. This video is actually pretty good (https://www.youtube.com/watch?v=ttIZ_iCLFGo) showing how to replace a blend door actuator on a 2006 through 2013 Chevrolet Impala. You might want to watch the video to see where and how to replace this component....
How do you replace the passenger power seat switch? Having a hard time taking off the Side panel that holds switch in place..
Remove the bolts that hold on the panel to the seat. Then you may have to remove the bolts that secure the seat to the floor to lift up the seat rail and gain access to the rail bolts to...
Motor won't rev past 3,000rpm
It sounds like you may have a crankshaft position sensor that may be on the verge of failing. A crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is an electronic device used to monitor the position or rotational speed of the crankshaft. This information...
where is innertia switch for 2008 lexus 250 is
The fuel pump cut-off function is integral to the circuitry in the PCM on this model. There is no separate, user serviceable switch. On this model, the only reason the fuel pump power cut-off feature will be invoked is if...

Related articles

How a Car Turn Signal Works
A A requirement for all automakers is to equip each vehicle with proper, standard lighting. Every vehicle is equipped with several lighting systems including: Headlights Taillights and brake lights Corner marker lights Hazard or warning lights Turn signal lights Turn...
What Do the Direction Indicator Warning Lights Mean?
The direction indicator lights signal when your car is turning left or right. If the lights flash quicker than normal, a bulb may be burnt out.
How to Replace a Turn Signal Switch
Turn signals are important for your safety and others the road. A faulty switch will be loose or stop returning once completing a turn.