Will only get warm when pressing the gas
Responses
Mechanic01
275 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
That would be a clogged heater core, have your mechanic flush the system and the core a few times it should fix the problem
Customer
275 days ago
Are you sure?? a couple people said antifreeze
Mechanic01
275 days ago
thats what is in the heater core is antifreeze
Customer
275 days ago
Okay So what might that run me do you know?? Ball Park figure?? and do i ust tell the mechanic i know its the heater core or explain the same way i did with you??
Mechanic01
275 days ago
yes just tell the mechanic whats going on and he will know what to do and a flush like that should be 300$ with fluid it takes a few hours to properly do that job
Customer
275 days ago
Okay Thank you. The website is finding a mechanic and i think it said 84.00
Mechanic01
275 days ago
Im not sure about what your reading, if you can send a link or screen shot I can help
Customer
275 days ago
Customer attachment 12/31/2020 12:21:57 PM
Mechanic01
275 days ago
oh thats a mobile mechanic, you will have to call their customer service about pricing
Customer
275 days ago
Thsnk you sir. Happy new year and stay safe!! This website is the shit!!
Mechanic01
275 days ago
Your very welcome! happy new year!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I view the outside temperature
The information display can tell you the outside temperature, so that you know how hot or cold it is outside. To view the outside temperature, press the Sel/Reset button until the outside temperature is shown on the information display.
Check Engine light flashing.
The check engine light flashing is most likely from your engine miss firing on one or more cylinders. The computer should be scanned to see what cylinder is miss firing and that cylinder checked for a failing weak coil pack,...
I have 3 error codes, P1784, P0731, P0732. I need help knowing what it means and how to I can fix it
All three of these codes are for the transmission and indicate you have issues with shift solenoids and gear ratio problem. Each code is a problem with a different part of the transmission and would require separate diagnostics for each...
Ac not blowing cold air
You may have different problems that would require the pressures to be checked to see if your refrigerant is full. The A/C compressor (https://www.yourmechanic.com/services/ac-compressor-replacement) needs the proper amount of refrigerant to turn on and the temperature blend door actuator may...
My Mercedes Benz Gl450 will tilt to the right quite a lot and the air matic won't work and the front right wheel almost touches the fe
This is likely a compressor issue. The compressor may be faulty or may have a bad connection. This can be tested several ways. You may have a code available from the computer which explains more about the compressor issue. You...
Stuttering when idle but the revs sit steady at 900 rpm and there are no issues accelerating.
Hi there. Sounds like the lift fuel pump is malfunctioning or there is air in the fuel system. First, check the fuel level in the fuel tank and make sure that there is at least a half tank. Then check...
How many psi does the power steering hose withstand
Two types of hose are used in power steering applications, a low pressure hose for the return (to reservoir) fluid and a high pressure hose for pump discharge. Low pressure hose is generally rated at 400 PSI and operates at...
Fuel EVAP line that runs under car is kinked how do I know if it is leaking? Also can I drive it like that if it's not leaking?
Hi there. In most cases, an EVAP leak will create an OBD-II trouble code, which is the best way to detect an EVAP leak. By having a professional mobile mechanic complete a check engine light inspection (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection), they will be...
starter Bendix is free spinning with a 34% I have taken out the starter an checked the teeth on it an flywheel I also bench testd
The problem sounds like the starter is bad and cannot be tested on bench properly for engagement. I recommend getting the starting battery system checked and replace the starter after checking the system for any other issues.
Browse other content
Services
Estimates
Maintenance
Will only get warm when pressing the gas Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—same as usual? No and yes Maam Mechanic's Assistant: What is th...
Will only get warm when pressing the gas Mechanic's Assistant: Have you noticed an increase in fuel consumption? And how does the vehicle start—same as usual? No and yes Maam Mechanic's Assistant: What is the make/model/year of your car? 08 toyota [camry](/topics-camry/) Mechanic's Assistant: Are you fixing your Camry yourself? What have you tried so far? Just need to know what to tell my mechanic is wrong and see what the prices is looking like