I hav a Toyota allion 2005 an I hav a proplem with my car...


I hav a Toyota allion 2005 an I hav a proplem with my car when I start up un put my car in drive it make a humming sound un move very sluggish then just take a speed lik it jump tp the 3 gear then jump to the over drive but don't ...

I hav a Toyota allion 2005 an I hav a proplem with my car when I start up un put my car in drive it make a humming sound un move very sluggish then just take a speed lik it jump tp the 3 gear then jump to the over drive but don't take the 1st an second gear at all revers very find Mechanic's Assistant: How old is the transmission? Have you checked the [brake](/topics-brake-toyota/) switch? Yes Mechanic's Assistant: What is the model of your '05 Toyota? Allion 05 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I hav put down the transmission check all the parts is find Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? And I hav chance the transmission solenoid

Automotive Expert
"Hi, I'm Roy. Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply momentarily." You will see an option to receive a phone call prompted by the website, you can agree to or decline. If you do not wish to use the Phone Service, we can continue chatting this way back and forth until you are satisfied with my help. Who Am I speaking with today ? Hi! Hope I can help sorry to hear about your car not shifting corrector have you checked the codes in the controller ? let me know Thank you Roy!

it has no code now before I use to get a check light when scan I get p0753 I chance both solenoid now no code but car still do the same thing
Automotive Expert
Did you have any metal in the pan at all ? or clutch material
Automotive Expert
if the solenoid did not fix the issue you could have a sticking valve in the valve body or a pressure loss also in the transmission just post me back
Automotive Expert
Let me know if you need anything Thank you Roy!

What others are asking

What tire size should I use and what inflation pressure should I set them at?
Your tires provide you with traction, stability and performance on the road. Of course, they wear out over time and you’ll need to replace them eventually. It’s very important that you replace them with the right size tires, and that...
Oil leaking from car
Hello, it sounds like you may have a gasket or seal leaking on your car. Smoke in the exhaust could indicate 2 things; you're burning oil or burning coolant. If you're burning oil that usually means your valve seals and...
Traction control sensor going off after installing lift kit
Hello. It is very possible that the larger wheels and tires that you put on your vehicle are causing the traction control to go off. The traction control is designed to work with the tires that came with your Jeep...
When replacing the brake switch, why would the 3rd brake light work and not all 3?
It is possible that both of the brake light bulbs (https://www.yourmechanic.com/services/brake-light-bulb-replacement) are out. It is also possible that the other two brake lights are on a separate fuse from the third brake light which could cause the third brake light...
Truck shaking violently at 40mph or faster.
Hi, thanks for writing in. This may have happened for a few reasons, however it is quite likely that due to the difference tread size, this may have caused one or any of the tires to wear incorrectly causing an...
Power Steering Pressure Switch discontinued...
Thanks for writing in. You may not have considered moparrepairconnection.com (http://parts-catalog.moparrepairconnection.com/catalog-2/itemdetail/mopar-brand/4606269) or rockauto.com (http://www.rockauto.com/en/moreinfo.php?pk=320060&jsn=232), both of which show this part as available. If you need help with this replacement, a YourMechanic certified mechanic can perform the power steering pressure switch...
Truck wont seem to shift into park.
Since the transmission does shift into park with the shifter disconnected, the problem lies elsewhere. Most likely the issue lies in the shift interlock system. It could be a faulty ignition lock cylinder not triggering the interlock system to allow...
Doors wont lock or unlock with fob or switch?
Hello. Further testing should be done to help solve your problem. Being that the door unlock reprogramming procedure has already been done and the fuses have been checked there's not much left it could be. When you hit the unlock...
I have a 2013 Honda Civic with 80,000 miles. It makes a squeaking noise while driving.
The factory brake pads do have a noisemaker tab that scrapes the brake rotor when the brake pads reach replacement thickness. It's pretty loud, so if you just have a mild squeaking that might be something else. At 80 K...