Second opinion] The flywheel came off as i was driving du...


Second opinion] The flywheel came off as i was driving due to a loose bolt and the flywheel flange at crankshaft was damaged i was wondering what other components of the vehicle could be damaged and if only resurfacing the flange ...

Second opinion] The flywheel came off as i was driving due to a loose bolt and the flywheel flange at crankshaft was damaged i was wondering what other components of the vehicle could be damaged and if only resurfacing the flange or changing yeah crankshaft will be enough Mechanic's Assistant: What is the make/model/year of your car? 1990 toyota mr2 turbo jdm Mechanic's Assistant: Are you fixing your MR2 yourself? What have you tried so far? I am fixing it myself I removed the transmission to check the flywheel and i noticed the damage on the crankshaft flange which is not bad also it had an aluminum flywheel Mechanic's Assistant: When was your transmission fluid last checked? Like a year ago Car has been parked for a couple of months

Automotive Expert
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* and I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime. can you post a pic of the flange?

File attached (TQ1S6SG)
Automotive Expert
buy a new fly wheel i would run that crank looks like it will be fine

Yeah no all the clutch components would be changed i was just wandering if there anything inside the [engine](/topics-engine-toyota/) that could be damage because it the flywheel came of while driving
Automotive Expert
does the engine rotate freely?

it runs
Automotive Expert
then it should be fine

How should i go about resurfacing that flange ? Also should the holes be retapped ?
Automotive Expert
tap and die set clean up the threards and any high spots file or emery cloth them flat

Does it has to perfectly flat like machined flat or normal flat will do ?
Automotive Expert
flat will do

Alright man sounds good thanks a lot for the advice Happy holidays
Automotive Expert
Happy holidays

What others are asking

ABS brake traction control lights on
Hello, Any time there is a problem with the Anti-lock Brake System or the ABS in any vehicle, including your Dodge Durango, the traction control will automatically disable and display the light you are seeing. This is due to the...
Battery dies if the car sat for over 20 hours
Batteries that drain (https://www.yourmechanic.com/article/the-top-5-things-that-will-drain-your-battery) overnight are common. Usually when this occurs, there is a parasitic drain on one of the car's systems. When this occurs it drains the battery down over time. Batteries that are drained down repeatedly can cause...
Problem starting car and dies while driving
This sounds like it could be a faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or a camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). These engines had problems with both. The hard start and the backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) may be the camshaft sensor. The stall and no start condition...
Transmission doesn't shift, gets stuck in fail safe mode.
Depending on the circumstances, it may in fact be in "fail-safe" mode. When this happens you will normally also have a Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) on which will usually cause fault codes to be registered in the ECU. When the...
P0231 code coming on - reduced RPM and trembling with the AC on
Diagnostic Trouble Code P0231 (https://www.yourmechanic.com/article/p0231-obd-ii-trouble-code-fuel-pump-secondary-circuit-low-by-jay-safford) relates to a problem with the wiring in the fuel pump circuit, although it is also possible to have a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) that draws too much current and creates a voltage drop in...
What type of oil does an Audi A4 quatro 2009 use?
You can use 5W-40 synthetic oil that meets Volkswagen standards 502.00 and 505.00. Alternatively, you can use 5W-30, 0W-40, or 0W-30. If the light you are referring to is a low engine oil level warning light and the oil level...
All wheel drive not disengaging.
Hi there. If the AWD light tends to flash slow, then the wheel range is high and the abs sensor would need replaced. If the AWD light is flashing fast, then the powertrain oil temperature is rising quickly. In that...
i need a new rear bumper on a 2016 chevy cruze
Hi...the parts and labor will depend on exactly which components are missing and/or damaged. Therefore, the only way to obtain an ironclad estimate is to have a certified mechanic come to your location, inspect the damage, determine why the bumper...
My 89 ford ranger runs everything works but it will shut off and will not start again for day or two. Everyone says eec power rela
The problem sounds like the fuel pump or fuel pump relay is bad. If you turn on the key and the check engine light is on then the EEC relay is good. You should hear the fuel pump in the...