Q: tool name
my doubt is which tool is use for wagnor car while removing seat for the purpose of putting new seat cover
Most vehicle seat covers are held onto the seat with hog rings. These rings can be removed and installed with a pair of hog ring pliers. These can be found online or at your local hardware store. It is also possible to remove the hog rings with a pair of needle nose pliers.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Not turning over
Hey there, thanks for writing in about your 2003 Hyundai Santa Fe. This kind of condition is often very confusing for a non-tech. Even though your battery cables are tight, it does not mean the connections are good. Corrosion, surface...
Car turns over but wont start. 1999 Pontiac Grand Am
Hey there. You'll need to have the fuel pressure tested also. If okay, then you need to see if your injectors are opening to supply fuel. If you have compression, fuel, and spark, then the engine should run. I recommend...
When accelerating from standing stop engine hesitates
I would recommend checking the mass air flow sensor as this is a commonly known part that can cause this kind of loss of power. This regulates the air intake into the fuel injection and ensures a proper air/fuel mixture....
My car will start, but will not run
This may be a sign of a failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine. This valve is controlled by the...
There is an unidentified knocking sound by my feet while driving
It sounds like the flex plate between the engine and transmission is making the noise. The flex plate could be loose or cracked, making a constant knocking sound, and you can feel it on the floor by your feet. You...
Help!! 2008 Acura RDX
Hi - the "triangle" warning light - by itself - is an indicator that anti-skid braking and traction control (https://www.yourmechanic.com/question/what-does-the-traction-control-system-tcs-off-light-mean_2_21789) are operating. The delay in selecting reverse and poor performance afterward is indicative of other issues. There are technical service...
Crank no start
There are several possible reasons for a vehicle to crank and not start. A bad fuel pump, clogged fuel filter, faulty injectors, bad ecu, failed ignition coil, or a malfunctioning sensor. It will first be necessary to figure out if...
Code P1399
Hi There, As you know, this codes relates to a misfire, but is more commonly known to be caused by valves out of adjustment or in some cases clogged EGR valve passages. When the valves are out of adjustment, this...
screw edge of sidewall
Hi there. The general policy on repairing tires with a screw or nail, is that the puncture needs to be contained within the tread of the tire, up to 1/2" from the sidewall. Due to this fact, when there is...
Related articles
Symptoms of a Bad or Failing Mirror Control Switch
Common signs include mirrors not adjusting side to side or up and down, not adjusting at all, or not adjusting from the slave (passenger) switch.
How to Choose the Best Car for Your Teenager
In many places, teenagers (https://www.yourmechanic.com/article/how-to-show-a-teenager-basic-car-maintenance-by-cheryl-knight) need a car to get around and get to school. So, once they have their license, it is time to find an appropriate vehicle for them to drive. Shopping for a car can be plenty...
How to Replace a Backup Light Switch
The backup light switch connects to your transmission and turns on when you shift into reverse. This switch lets drivers know that you are backing up.
Browse other content
Services
Cities