Q: Passenger side door panel works, but driver side doesn't

The key-in ignition warning chime sounds when you have opened the driver’s door while the key is still in the ignition.

You may have a bad tire or something that is loose on the front end. I would suggest having a mechanic lift and inspect the tires (https://www.yourmechanic.com/article/how-to-do-a-tire-safety-inspection-by-jason-unrau) and front end to see if there is a front tire or axle...

You may have a bad door latch and they are not serviceable. You will have to replace the latch and the lock actuator if it is not an integral part of the latch. If you would like to have this...

Hi and thanks for your question. Sounds like there could be a fuel or spark issue with your engine. First you would need to scan the computer for what the engine light code has stored to have a starting place...

Hey there, thanks for writing in about your 2006 Land Rover LR3. Unfortunately, this is a specialized service only available through Land Rover service centers, and not a cost estimate readily available to us here at YourMechanic. I recommend requesting...

Hi there. The code p0403 (https://www.yourmechanic.com/article/p0403-obd-ii-trouble-code-exhaust-gas-recirculation-circuit-malfunction-by-jay-safford) is for the EGR circuit that shows it has malfunctioned. The code p0430 (https://www.yourmechanic.com/article/p0430-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-2-by-spencer-clayton) is for the catalytic converter showing that its below threshold. Check the harness to the EGR and make sure that...

Hi - unfortunately, this is not a service YourMechanic can offer at this time. Thanks for thinking of us!

Hello - unfortunately, this is not a service YourMechanic offers at this time. Thanks for thinking of us however!

The bolt size that you need is 10 mm and the treads of 20 metric with a torque of 71 inch pounds. The best thing to do is take a thread gauge tool and check to see if the treads...