Just tryin to keep doors from locking when I put it into ...
Customer
Just tryin to keep doors from locking when I put it into gear
Mechanic's Assistant: Is it your first time dealing with this issue?
No
Mechanic's Assistant: What is the make/model/year of your car?
2012 Nissan alt...
Just tryin to keep doors from locking when I put it into gear
Mechanic's Assistant: Is it your first time dealing with this issue?
No
Mechanic's Assistant: What is the make/model/year of your car?
2012 Nissan altima
Mechanic's Assistant: Are you fixing your Altima yourself? What have you tried so far?
Yes the menu on the on board system
Read More
Responses
Keiphun Sowell
255 days ago
Automotive Expert
Hello, My name is\*\*\*\*\*'m the Technician that will be assisting you today.
I co-own a Restoration/Advanced troubleshooting shop. So My hours on here vary day to day.
**If I respond to your question that means I will be online for at least 30 minutes. If you respond after that time period, I will see your message and review it. But will not respond until I back get online.**
I do not work for Just Answer, They have just allowed me to use their platform to help customers like yourself.
**You may receive a automatic call request, which is a good option if you don't like texting. But I will almost never have the time to place a call. If I'm assisting you and we find a call is the best route. I will call you then.**
**Also under no circumstance do you post personal information other than your first name. If personal information is required (like your phone number) Just Answer has a secured way to exchange information.**
Its a pleasure to get to assist you. Whom do I have the honor to be speaking with.
Keiphun Sowell
255 days ago
Automotive Expert
Hello, It is a pleasure to get to assist you.
MODE CHANGE TEST PROCEDURE:
To change the AUTO-UNLOCK mode for testing purposes, perform the following procedure:
a. First, close all doors.
b. Then place the ignition switch in the ON position,
c. And do the following within 20 seconds of performing Step b:
\> To change AUTO-UNLOCK settings, push and hold the power door lock switch to the unlock position for more than 5 seconds.
\> The hazard warning lights will flash when the mode change is confirmed.
d. Turn the ignition switch OFF, and then back ON again.
To change the AUTO-LOCK mode for testing purposes, perform the following procedure:
a. First, close all doors.
b. Then place the ignition switch in the ON position,
c. And do the following within 20 seconds of performing Step b:
\> To change AUTO-LOCK settings, push and hold the power door lock switch to the lock position for more than 5 seconds.
\> The hazard warning lights will flash when the mode change is confirmed.
d. Turn the ignition switch OFF, and then back ON again.
**NOTE:**
^When the auto-lock or auto-unlock function is disabled, the hazard warning lights will flash once. When the auto-lock or auto-unlock function is enabled, the hazard warning lights will flash twice.
^Only one mode change (auto-lock OR auto-unlock) per ignition cycle is allowed.
If the function does not perform as described here, refer to the appropriate ESM for further information.
Please let me know if you have any other questions or concerns. Thanks
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Your Altima has a pretty advanced computer system capable of monitoring various systems and alerting you to problems. One of the most common issues with any vehicle is leaving the gas cap loose (or off completely). This allows fuel vapors...
Hi, I wouldn't drive this car until a certified mechanic has verified the brakes are in a safe operable condition (https://www.yourmechanic.com/services/brake-safety-inspection-inspection), either have it towed to a mechanic or call a mobile mechanic. The brake lines provide a path for...
Hi, over time the tumblers in the lock cylinder can wear out or get debris lodged preventing rotation. The notches on the key also wear out over time which doesn't fully unlock all of the tumblers preventing the key from...
Without being able to hear the noise it will be hard to make an accurate assessment, but worn or damaged strut mounts can be extremely noisy while driving over bumps and exhibit a noise similar to what you describe. However,...
Hi there. A car that is difficult to start in the morning can be caused by a battery that is losing cold cranking amps, a faulty starter solenoid, distributor or ignition coils that are worn out, or fuel system components...
Hi there. When locking the vehicle, the antitheft computer beeps the horn to acknowledge the doors locking and the system arming. It sounds like your spiral cable, or clock spring cable, has broken. Are there any other steering wheel functions...
Hi there - I would check the turn signal (https://www.yourmechanic.com/article/how-a-car-turn-signal-works) light bulbs and ground connections on the side which is not flashing. Burned out bulbs, shorts and poor ground connections can cause the "no flash" behavior you describe. If the...
Hi Kyle, It sounds like you may have a failing or worn out wheel bearing. A wheel bearing (https://www.yourmechanic.com/services1/wheel-bearings-replacement) will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the...
Changing the engine will determine what type of engine you have. If you have a CPP 24 valve Cummins engine, then the engine will swap just fine as they fit the 1998 to 2005 models. However, if your vehicle requires...
Just tryin to keep doors from locking when I put it into gear Mechanic's Assistant: Is it your first time dealing with this issue? No Mechanic's Assistant: What is the make/model/year of your car? 2012 Nissan alt...
Just tryin to keep doors from locking when I put it into gear Mechanic's Assistant: Is it your first time dealing with this issue? No Mechanic's Assistant: What is the make/model/year of your car? 2012 Nissan altima Mechanic's Assistant: Are you fixing your Altima yourself? What have you tried so far? Yes the menu on the on board system