Q: Need to locate the oil filter on a 2001 Oldsmobile Silhouette

Hello, From the way you describe you noise, the first thing I would take a look at is the power steering fluid level (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection). If the level is low, there is probably a power steering leak that needs to be...

Hi, thanks for writing in. I'd be happy to provide some insight. The smell you are getting may be a small amount of water that sits in the air conditioning system. After you shut it off, it will start to...

Hey there. The two coolant chemical compositions are different and may cause corrosive action or gelling of the mixture. If it becomes corrosive, it may damage gaskets and metal components in the engine. If the mixture becomes gelled, then it...

Hello there, parking brake cables will fail over time in your 1994 Chevrolet K1500. Over time the cable stretches and can break when the parking brake is applied. The parking brake cable is a safety feature and must be replaced...

Hello. This can be caused by a few different things. Most of the time it is caused by an issue with the air intake tube not being tightened securely.If any of the clamps on the intake are loose then this...

Lisa: The sales tax alone on a brand new $25,000 car is about $2,000. Obviously, a repair bill of $2,700 (or less, if possible) looks attractive in a comparison like that. If you buy a "used" car from a dealer,...

Hi there. If you have recently replaced shocks and struts, along with tires on your Accord, but still having a rough ride, it's possible that the stabilizer bar bushings are worn out and need to be replaced. It's probably best...

Hi There, It sounds like you may have a clogged catalytic converter. A clogged or failing catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) can cause the vehicle to have poor fuel economy. As you may already know, the catalytic converter converts toxic exhaust gases...

Hi there. Either the timing belt came off or the crankshaft position sensor could have failed. Remove the valve cover and crank the engine over. If the engine crank turns and the valve train moves, then the timing belt is...