Hello, I need to replace front axle seals and pinion seal...
Customer
Hello, I need to replace front axle seals and pinion seal on a 2012
Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your car. Before I do, is there anything else you want ...
Hello, I need to replace front axle seals and pinion seal on a 2012
Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your car. Before I do, is there anything else you want him to know?
It’s a 2012 jeep wramgler jk 3.6 automatic
Read More
Responses
Bart
218 days ago
Automotive Expert
Hi I'm Bart. I'll be glad to help you with this.
What would you like to know?
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Engine coolant does exactly what the name implies – it transfers heat from the engine, ensuring that it doesn’t build up and damage the engine. Having the right amount of coolant in the system is essential, and it’s important that...
The most likely cause for this is that the transmission torque converter overdrive lock up clutch inside the converter is chattering when it is engaging after about 45 mph. The problem may be with the solenoid that operates it or...
Depending on the tires you have and, if they are of the run-flat type, your tires run-flat may be loose causing the vibration until it moves into a position that is balanced again. I would recommend having each tire removed...
There are numerous potential causes for the problem you are having. One thing that comes to mind is a failed engine coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) (ETC). The ECT does exactly what it sounds like - it monitors engine temperature. The...
Hi There, A failing manifold gasket could certainly contribute to a problem with the engine starting, however this would not necessarily go away when it warms up since it would be a constant leak into the intake system, which would...
Hi there. The Pitman Arm & Idler Arm are essentially the same component; however, they operate on opposite sides of the vehicle. The idler arm operates on the passenger side, while the pitman arm connects the steering box to the...
Hello, thank you for writing in. Start by tightening up the linkage. You can even make adjustments to the linkage to compensate for wear. The transmission pan should be taken off and inspected. If there are any signs of mechanical...
The electric cooling fans are powered through relays, a fuse, and a control module. The fan motors themselves should be tested (the fan motors can be independently powered, on or off the car, to see if they work properly) and...
Hello, I need to replace front axle seals and pinion seal on a 2012 Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your car. Before I do, is there anything else you want ...
Hello, I need to replace front axle seals and pinion seal on a 2012 Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your car. Before I do, is there anything else you want him to know? It’s a 2012 jeep wramgler jk 3.6 automatic