2004 Jeep Grand Cherokee I change the key .oskim the key ...


2004 Jeep Grand Cherokee I change the key .oskim the key the instrument cluster The computer and the body control module or whatever do I have to get the vin program to that computer jeep isnt running write Cluster is not working ...

2004 Jeep Grand Cherokee I change the key .oskim the key the instrument cluster The computer and the body control module or whatever do I have to get the vin program to that computer jeep isnt running write Cluster is not working

Automotive Expert
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime. - I'm sorry to hear about any troubles with the vehicle, but would be glad to try and help! - Sometimes you'll run into issues if all of the modules don't have the same vin programmed. Recommend having mobile mechanic or locksmith with program ability come out and program the modules and ignition keys, then see if it will start. If the modules wont store the vin of your truck, recommend using new modules, or swapping out the modules, then replacing the faulty transceiver ring, or other faulty part and having programmed performed. - Lemme know if seeing any trouble codes, or module communication issues while checking things out!

What others are asking

How do I set the security alarm?
The security alarm is a key safety feature that helps keep your car from being stolen. When someone enters your car without a key or the remote transmitter, the security alarm will activate, and the horn will honk and the...
Parking brake stuck
Hi. If your parking brake is stuck, there may be a problem with the handle itself, or perhaps the cables or drums underneath the vehicle. I would recommend having the vehicle's brake system inspected (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) by a professional technician, such...
Gas Pedal is very hard at beginning and RPMs drop.
If the throttle assembly has a cable that attaches the pedal to the throttle valve, the cable must be inspected to see if it is binding within the insulation. Excessive carbon build-up may cause the throttle plate to stick (https://www.yourmechanic.com/services/clean-throttle-body),...
My car starts then stallsafter a few seconds and won't start again
Hello. The steps you have taken at this point are all appropriate, and help to eliminate a lot of the electrical components that can cause stalling (https://www.yourmechanic.com/services/car-is-stalling-inspection). You may be looking at a mechanical issue instead of an electrical one....
Climate control module. Heater core
Faults in electronic or mechanical control components in the HVAC system have no effect on the heater core in the passenger cabin. The heater core itself is not a component that would looked at as a cause of engine overheating....
How much would it cost to replace a head gasket in a ford e-150 ecoline wagon
Hi Jennifer. Thanks for contacting us today. Unfortunately, replacing a head gasket is not a service that our mobile mechanics can offer - as it requires more equipment and time to complete than our mobile services can provide. Your best...
Car won't start
Without seeing the extent of the damages it would be hard to figure out the part that is damaged. I suspect the steering column ignition switch got damaged.
My car started then died now it's just clicking what could it be
It sounds like your battery might be dead. It is possible that the alternator has failed and cause your battery to drain which would explain why the engine started and then died right away. I'd recommend having your vehicle inspected...
2006 chevy impala, car doesnt accelerate past 20 mph only when first starting the car, after it shifts it runs fine, getting worse
The problem is with the internal shift solenoids not shifting the internal valve and you should first try to get transmission serviced and filter replaced. If after servicing the transmission and if it does not fix the problem then will...