Q: If u replace one motor mount should u do the rest?

You should have your A/C drain checked to make sure it is clear. You have floor vents that go under your seats, and if the A/C drain is plugged or not draining, then the water will come out of the...

You will need to have a mechanic diagnose both the codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) to see if you have a problem with both sensors or have a problem with the timing of the engine being out of position. The codes suggest that...

Hello. Thank you for writing in. There are several reasons why your bulb would continue to burn out prematurely. The first thing you want to check is that you are wiping any oils from your hands off of the bulb....

Hello, What you are describing may be related to a safety switch that automatically causes the ECM to shut down the ignition to the engine when the oil pressure sensor (https://www.yourmechanic.com/services/oil-pressure-light-is-on-inspection) reaches a certain level. This is the computer's way...

I can think of a couple of things that could potentially be causing this issue. If you have an intake manifold gasket leak near the number four cylinder, this can cause the cylinder to misfire. If the number four cylinder's...

Hi there. The cost of replacement will vary based on what model the vehicle is and if it is all wheel drive. It will also vary based on where you have it done due to the labor cost and what...

Hello. Most of the time this is caused by the timing chain making noise in the engine. I will usually check the oil and replace it with the right oil and filter to see if it helps. A poor quality...

Hi Shukri. Thanks for contacting us today. This problem could be due to a fuel delivery issue, caused by either a worn out fuel pump, dirty fuel filter, clogged fuel injectors, throttle body problems or even the mass air flow...