Q: I'm losing antifreeze somewhere

Automatic transmissions have been called “slush boxes” for years by old drag racers. The main reason for this name is they are a fluid driven device. Because of this, fluid level and condition are crucial to proper operation. Unfortunately, the...

The vehicle stability assist (VSA) Warning Light is located on the instrument panel. When the light illuminates, then there is either a problem with the VSA system, or with the hill start assist, and the vehicle should be inspected. Tip...

Flickering lightbulbs are usually caused by a loose connection try wiggling the connector of the problem bulb to see if thats the problem, a partially broken wire would also cause this symptom. Have a mechanic come an inspect (https://www.yourmechanic.com/services/lights-headlamps-beams-brakes-inspection) and...

Hello. The jerking you feel are most likely caused by the spark plugs misfiring (https://www.yourmechanic.com/services/spark-plugs-replacement). The spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), distributor cap and rotor (https://www.yourmechanic.com/services/distributor-rotor-and-cap-replacement) button replaced. This should solve the problem that you are experiencing. The truck should...

Hello There, It sounds like you may have a dirty or faulty idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system that reads the air intake as it comes into...

This does not sound like a safe driving condition to me. I would recommend having the vehicle inspected by a qualified professional as soon as possible to ensure that no damages to the vehicle are present. Loud sounds like that...

If the brake noise (https://www.yourmechanic.com/services/grinding-noise-when-braking-inspection) is occurring at all times, that is even without pedal application, then the caliper and/or torque plate are sticking or there is a parking brake malfunction. If the noise only occurs upon braking, it is...

Both Codes (https://www.yourmechanic.com/article/p0014-obd-ii-trouble-code-camshaft-position-b-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) refer to a problem with the variable valve timing mechanism. The issue could be mechanical (basic timing is off), hydraulic (VVT relies on engine oil pressure), or electrical (there are solenoids, wiring, terminals). Regardless of the issue,...

Depending on what fuse you are referring to, this may impact whether or not the car will start. There are a number of relays that will affect the ability of the car to start such as a starter relay, a...