Q: I have an oil leak in Chevy Suburban 2001. What would it cost to replace the oil pan gasket or timing cover gasket?

My guess is that the overdrive relay or solenoid has failed. If either of these parts fail, your Volvo will not shift into overdrive. This is a very common problem on Volvos such as yours. A trained professional, such as...

You may consider having the brake pads changed with some non-Buick pads (i.e. aftermarket). Based on the number of complaints on this issue, General Motors seems to have a mismatch on brake pad material with this model. This will, unfortunately,...

Try checking all of the fittings near and around the oil filter housing as well as the oil pump. Check to be sure the correct O-ring is sealing correctly when the oil filter is screwed on as this is a...

Hi, thanks for writing in. The main thing to keep in mind when it comes to battery group sizes is its physical size. The cold cranking amps (CCA) is what is important when it comes to the battery's ability to...

This is a common sign of a lack of fuel supply to the intake manifold. This is usually caused by several things such as faulty fuel injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), low fuel pressure (regulator) (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) or not enough air supply. I would...

You should have a "select/reset" knob up in the right hand corner of your dash that will allow you to click and scroll through the various displays such as instant fuel economy, odometer, trip meter, outside temperature. Be sure the...

This may be a sign of a weak battery, a failing voltage regulator or failing alternator. As you know, if the belt is loose and enough torque is supplied, this may cause the belt to slip slightly causing the alternator...

This is likely related to your EVAP emissions system and something called a purge solenoid. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the fuel vapors...

The message is on for the lights are not completing a circuit from the switch to the lights. Check all of the wiring on the lights and see if all of them are plugged in properly. Then look for any...