Q: i changed my 2012 dodge carvan battery and after that airbag light comes on

While your car’s cargo compartment offers plenty of space for storing parcels, packages, boxes and gear, you might need to secure some items, particularly if they’re fragile or prone to sliding around (if the compartment isn’t that full). There are...

Hello. There are a couple of things that could be causing your problem. The purpose of the high pressure hose is to increase and decrease AC pressure during different driving conditions. If the a/c isn’t blowing cold air when the...

Hello there, thank you for asking about your 1995 Chrysler Intrepid. The powertrain control module (PCM) controls ignition timing by controlling the ground path to each coil. It uses signals from the crank sensor and cam sensor to determine spark...

Hey there. This may be a sign of a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior...

Hello. As you know, there are two main components to the heater in your vehicle. One is the heater core which uses the warm coolant passing through the motor (and the heater core), and the other is the blower motor...

Typically, if you feel "slack" in the steering, the rack and pinion (https://www.yourmechanic.com/services/steering-rack-gearbox-replacement) (or other "steering gear") unit is worn but the tie rod ends (https://www.yourmechanic.com/services/tie-rod-end-replacement) (inner and/or outer) could be implicated as well. Vibration or shuddering on application of...

Hello. The starting issue (https://www.yourmechanic.com/services/car-is-hard-to-start-inspection) you are having could very well be caused by the glow plug circuit. It may not be the glow plugs themselves (although it could be), but rather the wires and other parts of the circuit...

Hi there. Typically these codes are caused by an exhaust leak, clogged injectors, or intake vacuum leak. If problems just happened to start after getting fuel, then you may have a purge valve leaking excessive fumes into the intake when...

Hello, It sounds like you may possibly have a stuck EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement). The EGR valve allows the flow of exhaust gases into the intake manifold in controlled amounts. When you start the motor, the valve remains in a closed...