I have a knocking noise in the engine
Responses
BrianC115
254 days ago
Hello this is Brian I hope I can help. Can you please provide me with a VIN?
Customer
254 days ago
Yeah give me one second
BrianC115
254 days ago
Take your time. Thank you
Customer
254 days ago
Sorry im not home im trying to get someone to send me it
BrianC115
254 days ago
No problem. I'll be here till 5 and back tomorrow around noon. Take your time
Customer
254 days ago
Customer attachment 1/21/2021 8:11:34 PM
BrianC115
254 days ago
Thank you. Give me a few minutes so that a can pull up your vehicle.
Customer
254 days ago
You get it ?Okay thank you
BrianC115
254 days ago
Ok it sounds like you may have bad crankshaft bearings. But before we deadline the engine I attached a TSB which states to replace the oil filter with a hyundai oil filter if you still have knocking then remove the accessory belt to make sure its not the A/C compressor or any other belt component. With the belt removed start the engine and listen for the knock. If you still hear is then you may need an engine.
Customer
254 days ago
Yeah i already did an oil change with the oil filter and added oil stabilizer but ill do that as soon as i get home. For sure before 5 and ill keep you updated
BrianC115
254 days ago
Ok I'll keep this open for a week for your response. Take your time
Customer
254 days ago
You dont think it has to do anything with the camshaft. I did a code reading on it. The code was p0011
BrianC115
254 days ago
Is it a knocking or tapping?
Customer
254 days ago
Would say tapping
BrianC115
254 days ago
Ok let me check again.
Customer
254 days ago
Okay appreciate you
BrianC115
254 days ago
Ok check the oil and make sure its full. If its full then looks like you may have to change the intake varable timing solenoid. According the Hyundai the intake VVT adjusts the timing and will set P0011 if the solenoid fails.
Customer
254 days ago
Okay
BrianC115
254 days ago
Let me know how it goes.
Customer
254 days ago
I will thank you
BrianC115
254 days ago
No problem
Customer
254 days ago
What does it mean if i try starting it and its resisting or turns off. Before i even did anything to it
BrianC115
254 days ago
If it doesn’t want to start then the timing may be off.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car taking too long to pick up speed
Hello. If the engine seems to lack power than that can be caused by a number of things. Most of the time this is caused by a weak fuel pump or a failing catalytic converter. As for the headlamp the...
Tok-Tok-Tok sound when turning to right after >10miles/hours
Sometimes it may sound like a noise is coming from the rear when it is actually from the front. The best way to be certain is to have a passenger stick their head out the right window and listen to...
Flat towing / locate accessery position of key
In order to tow this vehicle behind an RV you will want to have the vehicle in neutral with the key in the off poition. When the vehicle's transmission is in neutral, the steering wheel is unlocked. This will enable...
Engine light keeps coming on after I reset it
Hi, thanks for your question. You will need to have the computer system scanned to see what code is stored in the computer and have it diagnosed. The code may be something from the previous repairs or something new. If...
car will not pass e-check.
N/A usually means the monitor isn't available on your year make and model vehicle. An emissions monitor should pass or fail or show ready and not ready after the drive cycle has been complete. In most cases, all drive cycles...
Check vsc system
Hi There, The VSC light relates to the Vehicle Stability Control system which is your car's traction control system. The traction control system monitors the steering stability of the vehicle and engages when loss of traction has been detected. This...
Which 02 sensor do you replace if you're getting bad gas mileage
Hi there. That's a very good question. The one you replace is the one that is faulty, as both sensors work together to take measurements and reading of the fuel system and exhaust to fine-tune the fuel to air ratio....
2014 jeep patriot reading code u 0401. Jeep wont accelerate when given gas. Traction control light blinks and lightning bolt light
The U0401 code broadly identifies "communication errors" in the vehicle's controller area network (CAN). In your circumstance, because the electronic throttle control (ETC) warning light has come on, an attempt should be made to diagnose the ETC system first because...
Browse other content
Cities
Services
Estimates
I have a knocking noise in the engine Mechanic's Assistant: Where exactly do you think the noise is coming from? And how long has this been going on? No idea and since last month Mechanic's Assistant: What is the ...
I have a knocking noise in the engine Mechanic's Assistant: Where exactly do you think the noise is coming from? And how long has this been going on? No idea and since last month Mechanic's Assistant: What is the make/model/year of your car? Hyundai [sonata](/topics-sonata/) 2008 Mechanic's Assistant: Are you fixing your Sonata yourself? What have you tried so far? I heard putting oil stabalizer would help it Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I did a code reading and it was “p0011”