Q: How many spark plugs and does it have a coil pack

The accessory belt is used to turn any accessory by the crankshaft of the engine any time the engine is running, without having a direct mechanical connection. The belt is used by the engine to turn all the accessories at...

Most of the time when this issue occurs it is due to the shift interlock solenoid going bad. Systems that use this part usually have a manual override button near the shifter in order to manually shift into a gear....

The master Warning Light is located on the instrument panel. This light will illuminate to accompany many of the warning lights. If you notice that the master Warning Light is lit, check to see which other warning lights are also...

More than likely, your brake rotors are warped (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-brake-rotor-disc). Warped rotors result in a vibration that can be felt in the steering wheel and/or brake pedal. A standard brake job with new pads and new or machined rotors (depending on...

If all these problems started happening at the same time then you will have to get the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) tested to see if it is causing the problems. The ECM controls all these lights using input from...

Hi there. A high speed shake is either caused by an imbalance issue with the tires and wheels or it can be a problem with worn out front end parts or warped hubs. I usually start diagnosing this by road...

Hello. It sounds like you have a tire (https://www.yourmechanic.com/article/how-to-check-if-your-tires-are-in-good-condition) or axle (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement) problem. If it is in the brakes, then you may feel it only when the brakes are applied. Have the front end checked to see if you have...

Hello. If these issues started at the same time then it sounds like there is an electrical issue. It may be a bad connection or a failing alternator. I usually start by load testing the battery and checking the battery...

Any time there is a major coolant leak from a broken hose there will be coolant that is sprayed all over the motor. After the coolant is repaired and the system is refilled and cooling system rechecked for any leaks...