Q: how long should it take to replace a brake vacuum pump on a 2003 Ford F-250 super duty ?
What is the time frame to replace a brake vacuum pump ?
My car has 189000 miles.
My car has an automatic transmission.
Without diagnosis or testing the vacuum brake booster pump will take less than 1.5 hours. The time may vary if components are rusted, corroded or any other problems are encountered.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do you use the trip A/B function in the message center?
The trip A/B function in your car’s message center is the same thing as the dual trip odometers on a model without the message center. These are separate odometers designed to let you track the mileage and the time on...
What is the maximum vehicle capacity weight?
The maximum vehicle capacity weight is located on the Tire and Loading Information label. The Tire and Loading Information label is attached to the vehicle center pillar. You can find the Tire and Loading Information label by opening the driver...
Hello I have a 2009 nissan murano and it's overheating do you know what the problem could be?
If you have replaced the thermostat, there could be a couple of other issues relating the cooling system, such as the coolant fan switch relay (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) or a clogged system. The coolant fan switch relay tells the coolant fans when...
Brakes failure - 2014 BMW X1
Hello. There is a recall for the brake booster (http://www.edmunds.com/car-news/2012-2014-bmw-320i-and-328i-among-vehicles-recalled-for-brake-booster-problem.html) intermittently not working and causing a loss of brake power assist. Contact your dealer to see if your car is covered under the recall.
My car will start, just not run.
Hi, thanks for writing in. I would start with testing your battery and alternator with a multi meter. Good batteries (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-car-battery) hold a charge of 12.6 volts or higher. If the battery is low, try to jump start it. If...
When turning the temp. selector from cold all the way to hot, does it click?
The a/c system has temperature blend door actuators that control the temperature door of the a/c heat system. The clicking is caused when the internal gears of the temperature blend door actuator cannot move the door inside the evaporator case...
Malfunction indicator (MIL) keep blinking
The check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is blinking most likely due to the engine is misfiring and the computer is warning you the engine catalytic converter may get damaged if you continue to drive it with the problem. You may have...
Hello, I have two questions: 1) How often the Ignition Coil needs to be replaced? and 2) This model requires grease chassis?
Hi there. The spark plugs are rated for 100,000 miles for your vehicle, so you have about 5,000 miles left on their life for a decent spark. I recommend changing the spark plugs with the OEM parts to ensure a...
My car cuts off without any warning signs and it was hard for me to turn the steering wheel. It was smoking a little under the hood.
Hi there. The issue may be that when the vehicle was filled up, there may have been trash in the gas tank and it may have been stirred up into the fuel system which may have clogged up the fuel...
Related articles
How Does Brake Fluid Get Contaminated?
For the most part, the braking system in a vehicle is closed, meaning bits of grit and grime can’t make their way...
2012 Chevrolet Malibu vs. 2012 Ford Fusion: Which One Should I Buy?
When you want a midsize sedan, you’re looking for something that will offer you the best fuel economy for the size as well as additional safety features that will keep your family safe while you’re driving across town or around...
How to Buy a Good Quality Brake Master Cylinder
The The master cylinder acts as the brake fluid reservoir on your vehicle. It’s necessary that this part be in good repair in order for the brake system to work properly – that means seals intact, pistons functioning optimally, and...
Browse other content
Services
Cities