Q: How do I use the keyless access system to lock the car?

This sounds like a good time to check the owner's manual to see if it mentions this at all. If it's an aftermarket alarm system, it may need to be manually reset through a certain procedure that is model specific....

There appears to be a lot of problems with that year Pathfinder, and Nissan has generated a Technical Service Bulletin that indicated a problem with the rear upper and lower link bushings that need to be replaced. I would recommend...

Odds are, if you smell gas while cranking the engine, it's getting fuel. It's probably not getting spark. Common causes for no spark: Bad crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). Bad camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). Bad engine control module. Shorted/broken wires (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection). The only...

Usually there will only be one crankshaft position sensor. However, there is also a camshaft position sensor as well. It is more likely that there is multiple cam sensors than crank sensors. It is possible for engines to have anywhere...

The ABS wheel sensors are a commonly known part to fail. As you know, these are located at each wheel and help the ABS system detect abnormalities in driving conditions which causes the ABS system to engage. Occasionally, these sensors...

Hello - yes, it is possible that the electrical connector for the throttle position sensor (https://www.yourmechanic.com/question/when-i-press-on-gas-pedal-it-s-not-accelerating-by-carl-p) has a loose or poor connection. It is more likely that the throttle position sensor is failing. It has redundant circuitry, which accounts for...

Hello - hot enough to melt a sensor is possibly an exaggeration, but it does sound like the engine needs a careful "going over". I recommend a thorough engine inspection (https://www.yourmechanic.com/services/car-is-not-starting-inspection) performed by a mobile, professional mechanic, such as one...

What you are describing sounds like a failing CV joint. A CV (Constant Velocity) joint is a shaft that connects the transmission to the wheels, essentially transferring the power from the drive train directly to the wheels. The CV joint...

It sounds like you may have some worn suspension components. Things like shocks/struts (https://www.yourmechanic.com/services/shock-absorber-replacement), sway bars (https://www.yourmechanic.com/services/excessive-car-bounce-and-sway-inspection) and control arm bushings when worn will make this kind of creaking sound when the weight of the vehicle is transferred during stopping...