Q: How do I shuffle a CD?

Greetings and thank you for writing in with this concern! Without knowing more about the conditions that cause the noise (when, where, how, etc) it is difficult to advise on this concern. Mazda has released a number of Technical Service...

This sounds like it could be a faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or a camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). These engines had problems with both. The hard start and the backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) may be the camshaft sensor. The stall and no start condition...

I would first check to see if your Check Engine Light is illuminated. If so, there are likely trouble codes that have been stored in your vehicle's PCM that may indicate what the problem is. In order to pull these...

The starting troubles you are having are likely related to your battery or your starter. You will want to start by jump starting the vehicle. If this works, the battery was drained. The battery then may just need a good...

Unfortunately finding the root cause of intermittent problems can be difficult. Especially if the vehicle must be driven until it is hot before it shuts down. Something that may be worth a try is to allow the vehicle to sit...

Some towing companies will remove the shifter cable to the transmission to prevent anyone from stealing the vehicle on the rig when the rig is parked overnight. This includes removing the battery cables as well. It is not likely to...

This is typically normal as the vehicle's computer goes through a series of systems checks when you turn the ignition to the on position. Once the computer is done performing these checks, the check engine light will turn off, signaling...

Hi Ester. Thanks for contacting us today. The first step in diagnosing a problem like you've described is typically tracing and verifying electrical connections that engage the starter. This would begin with the car battery, followed by ground wire connections...

If you need a programmed "original" key because you have changed out the column mounted ignition module, an automotive locksmith or any GM dealer can perform that service. YourMechanic professionals in some locales will have the capability, too, but that...