Replaced mastercylender and left caliper and hose on a201...


Replaced mastercylender and left caliper and hose on a2010 ridgeline honda truck. now my two front wheels are locking up. Mechanic's Assistant: Besides this, what condition is the Honda in? Excelent Mechanic's Assista...

Replaced mastercylender and left caliper and hose on a2010 ridgeline honda truck. now my two front wheels are locking up. Mechanic's Assistant: Besides this, what condition is the Honda in? Excelent Mechanic's Assistant: What is the model/year of your Honda? Ridgeline 2011 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? No, its an in laws. my husbands a certified mechanic,hes working on it.

Automotive Expert
Hi! This is Anthony, a master Honda technician here on Just Answer. Sorry to see you’re having trouble with your Ridgeline. With whom do I have the pleasure of speaking with today?

Laura,need some advice for my husband.
Automotive Expert
did you bench bleed the master cylinder before installing it on the booster? All the air from the system ???

have a honda ridgeline 2011, changed master cylender and left caliper and brakeline, now both front wheels are locking up. what does he do next?
Automotive Expert
did you bench bleed the master cylinder before installing it on the booster? All the air from the system ???

the persn who has the truck, did master cylender himself, and called my husband too bleed brakes. then left front locked up. so my husband changed left caliper and brake line. now both front are locking up,what does my husband do now?
Automotive Expert
ok, as i asked above the master cylinder needs to be bench bled then installed on the truck then the entire brake system needs to be bleed.

alright. so when the system has been bleed, and its still doing it, then whats wrong?
Automotive Expert
you need to take the master cylinder off the truck, bench bleed it, out it back in the truck, bleed the vsa module, bleed each caliper. You should have a pressure bleeder for this. If the issue is still happening then you need to see why its locking upo with a quality scan tool that monitors abs for lock up.

Thank you. Have a good day.thank you, \*\*\*\*\* \*\*\*\*\* a good day.
Automotive Expert
you too and thanks for coming to just answer

What others are asking

Radio and bluetooth acting up
Correcting issues like this with Ford Sync can sometimes be challenging, but not impossible to correct. Just as with your computer at home, sometimes simply updating the software is all that is necessary. Sync is a software program which can...
Tire damaged hitting curb.
After any sort of impact with the suspension you can have a series of parts that need to be replaced. When a mechanic comes across a situation like this the first thing that would be done is a visual inspection....
Charging system problem
For this problem, the alternator is the most common failure. I recommend having a certified mechanic like one from YourMechanic, come and test your vehicle for you to see if the alternator or another component is causing the issue. They...
The car will start fine may run for 20 miles then shut down stopping at a light, but will restart.
The code listed usually points to a malfunction in the throttle position sensor circuit. It makes sense the vehicle will shut down as the vehicle cannot operate safely if the control system cannot properly calculate the correct throttle position. As...
where is the gear oil located on the car
To check the gear oil level (https://www.yourmechanic.com/article/how-to-check-your-engine-oil) on your vehicle, there is a filler plug located on the drivers side, front of the transmission. The oil level should be 0-5mm below the lip of the plug hole. Keep in mind...
Replaced power steering pump and fluid is shooting out of cap after driving when i turn engine off
This is probably a consequence of air trapped in the system, and consequent aeration of the fluid, which builds pressure in the reservoir. If you did not experience this problem prior to the pump replacement, it might be due to...
I had my oil pan gasket replaced and car is still leaking oil
Hello, thank you for writing in. An oil leak like this can be tricky. First know that the oil pan, by design, is the lowest component in the oil system, so that gravity will collect the oil in the pan...
Front passenger wheel is leaking brake fluid
Hi there. Thanks for contacting us today. One of our mobile mechanics would be more than happy to come to your location to complete a brake fluid is leaking inspection, so they can determine what is causing the leak and...
hello I have an Infiniti FX35 2003 and replaced water pump thermostat and radiator. Car still overheating.
Hello. I would need to know when it is overheating in order to be able to diagnose what is going on. I would start though by making sure that all of the air is out of the cooling system by...