Hey Chad I replaced the spark plugs and it still didn't w...
Responses
Chad Farhat
223 days ago
Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.
Chad Farhat
223 days ago
Did the code come back after the plugs replacement? and if they did what are they ?
I would replace ckp at this time because of the intermittent no start
but the shaking part can be ckp or weak coils
at 198 k , plugs , replaced but I would replace coils as well
and there no start will be more ckp
now all this , you are not testing anything,u just replacing parts , after plugs and coils ad ckp ,if you still have an issue then you have test to specs, fuel pressure, spark strength, electrical ect
**Please Let Me Know**
**Thank You**
**Chad Farhat**
**ASE Certified Technician**
Customer
223 days ago
Yeah its still reading same code I will go ahead and replace the ckp and see how it goes
Chad Farhat
223 days ago
ok sound good let me know ,
do replace coils if you can as well
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car has a hard time starting
Hello! On your particular vehicle, the hard start condition is commonly caused by a faulty fuel pump relay, fuel pump, or fuel filter, so I suggest checking the fuel pressure to determine if there is a problem with the fuel...
Oil on underside of engine
Thanks for writing into YourMechanic.com today about the oil leak on your 2002 Acura and whether it's safe to drive with an oil leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-an-oil-leak). There are multiple reasons why your motor is leaking oil and just as many potential...
Battery Drainage
There are several things that can drain your battery (https://www.yourmechanic.com/services/battery-replacement). The clock, radio (https://www.yourmechanic.com/services/car-radio-is-not-working-inspection), alarm, and other components may be contributing to the battery drain. Make sure that the radio and amplifier is on a switched power source and that...
Stuck in Park gear - 1997 GMC K2500
Hey there. I would check to see if your vehicle brake lights work. The shift lock needs the brake switch to activate and the shift lock solenoid in the steering column. If you do not have brake lights, then you...
Engine coolant leak - 2000 GMC Savana 3500
Hi and thanks for contacting YourMechanic. Looks like the coolant is coming from the rear freeze plug on the back of the engine. For this issue, I would recommend putting coolant dye in the cooling system and run the engine...
The Check Engine Light is on but the scanner shows no codes.
The brand, type, quality, and manufacturer coverage of the scanner you bought will dictate how they read the codes. Unfortunately, not all scan tools are created equal (https://www.yourmechanic.com/article/the-best-tool-to-scan-for-extra-diagnostic-capabilities-by-timothy-charlet). When it comes to hybrid vehicles, you may want to make sure...
Stalling, misfiring, and erratic idle - 1995 Chevrolet K1500
Stalling and rough idling are usually an indication that the motor is not able to adjust to varying loads. The Manifold Absolute Pressure (MAP) sensor senses engine load and generates a signal that is proportional to the amount of vacuum...
failed smog test...white smoke coming out of exsuast pipe..burning oil..
Hello. Typically when you have white smoke/steam coming from the exhaust, you have a blown head gasket. The gasket is allowing oil and coolant passed when it should not. Have you checked the level of your coolant to make sure...
Transmission shifts into 1st and 2nd only. When it goes into 3rd gear, the engine revs up and seems as if the transmission is in neutral.
Hi there. According to the shifting charts to your transmission, third and fourth gear both use the Overdrive Clutch as a holder to get the gears with the Underdrive Clutch and the Fourth Clutch. Since your vehicle will only get...
Browse other content
Cities
Estimates
Services
Hey Chad I replaced the spark plugs and it still didn't want to start. I talked to my brother and he said it maybe a crankshaft postion sensor so I was about to try that and it started up this morning after a few trys it started i...
Hey Chad I replaced the spark plugs and it still didn't want to start. I talked to my brother and he said it maybe a crankshaft postion sensor so I was about to try that and it started up this morning after a few trys it started it was shaking at first but it went away and now it's starting every time with no problem.