02 2500 hd Sierra 6.6 lb7 duramax truck won’t start crank...
Customer
02 2500 hd Sierra 6.6 lb7 duramax truck won’t start cranks over its getting fuel I replaced cam shaft position sensor and primed fuel and still can’t figure it out
...
02 2500 hd Sierra 6.6 lb7 duramax truck won’t start cranks over its getting fuel I replaced cam shaft position sensor and primed fuel and still can’t figure it out
Read More
Responses
GM Tech (Cam)
358 days ago
Automotive Expert
Hello there, I am Cam.
I am licensed automotive technician with more than 18 years experience.
As an expert on the site, I only have access to your question. Any billing questions or concerns would require a customer service specialist.
A couple things before we get going;
- I am around most days but not every minute of every day. If you reply while I am offline, I will respond when I am next online.
-I am a Firefighter/Paramedic which might require me to drop and run at any time without warning. If this happens, I will reply as soon as I am able to.
-The website will automatically offer a phone call. Some times they are beneficial, sometimes not.
I am sorry to hear you are having troubles with your vehicle. While I am looking at your question, can you tell me who I have the pleasure of assisting today?
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Hello. If the coolant is leaking (https://www.yourmechanic.com/services/coolant-is-leaking-inspection) that fast then you should be able to see the vehicle leaving a puddle on the ground. If it is leaking onto the ground then it can be from a number of places....
If the fan is drawing too many amps and the alternator is not charging enough, this can cause a large sudden drain on the electrical system and cause the stall. Have the fan motor (https://www.yourmechanic.com/services/cooling-radiator-fan-motor-replacement) and charging system checked to...
Hi there. If the battery keeps going dead overnight, then there is a parasitic load applied to the battery. Charge the battery (https://www.yourmechanic.com/services/battery-replacement) to a full charge of 12.6 volts. With the battery installed in the car, remove the negative...
In order to find out why the interior lights are staying on while driving and after you close the door will need to be checked by scanning the lighting control module to see if one of the doors latch switches...
Hi there. The best thing to do is go to the local parts store and have them get a harness for your vehicle with a 2.3L engine and a 3.0L engine. Then you can compare the different wiring harnesses to...
Depends on if you drove the vehicle with straight water or nothing in the cooling system. If there was nothing in the cooling system, then the head gasket may have burned causing the coolant to slightly leak into a cylinder...
Hello and thanks for writing in. Code P0174 relates to a lean fuel condition which is typically caused by a faulty mass air flow sensor or potentially a vacuum leak beyond the mass air flow sensor causing the reading of...
02 2500 hd Sierra 6.6 lb7 duramax truck won’t start cranks over its getting fuel I replaced cam shaft position sensor and primed fuel and still can’t figure it out ...
02 2500 hd Sierra 6.6 lb7 duramax truck won’t start cranks over its getting fuel I replaced cam shaft position sensor and primed fuel and still can’t figure it out