When I shift my 2010 Ford F-150 it usually makes real lou...
Responses
Mechanic01
227 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
That sounds like a internal issue with the transfer case, it may be a gear problem or actuator not working properly for the shift. What actuators did the mechanic replace? did he check anything else or just replace parts with no diagnostics?
Customer
227 days ago
I believe he replaced both front actuators, at least that’s what I was told
Mechanic01
227 days ago
is this something you asked him to do or he diagnosed it as the problem ?
Customer
227 days ago
He said he diagnosed it
Mechanic01
227 days ago
oh wow that doesn't sound like he knows whats going on, he does owe a refund then for misdiagnosis and im not sure you want to take it back to him for further diag. At this point is could be electrical issue or something internal on the transfer case. I would see if you can find a local trans guy with good reviews that can check it out.
Customer
227 days ago
Ok I'll do that, thanks
Mechanic01
227 days ago
Your welcome, if you have any questions while its in just let me know.
Customer
227 days ago
Ok will ,
Mechanic01
227 days ago
sounds good!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What does the Master warning light on the dash mean?
The Master Warning Light is usually accompanied by another warning light, and indicates that one or more warning systems have been detected. The Master Warning Light ranges in its levels of significance and severity. It is important to check your...
Vehicle not starting.
This truck came with a three different size engines. The most common reasons for no starts are the engine timing belt is broken. The fuel pump is not pumping and would need replacement. A qualified mechanic would be able to...
Stereo not working
Hi there. A common solution for a radio that does not work is to have a mechanic check any fuses or connections that go to your stereo. As for your speakers not working, this may be due to a loss...
Heard a loud noise and the car turned off.
You have had a catastrophic failure of the rear end, transmission, or a component at a wheel. This is a major repair that will first require someone to determine which component failed. To figure this out, I would lift the...
Replacing a power window motor - 2005 Chevrolet Equinox
If you have already removed the motor and regulator assembly but are unable to separate the two, I would recommend using a pry bar of some sort to try to separate the gears. If this does not work, it is...
Car jumps in 5th when pushing gas pedal
This suggests you may have a worn or failing 5th gear synchronizer in your transmission. As you may know, when a clutch drags, it is not letting go of the disk fully which overloads the synchros and burns up the...
Why did the traction control light come on after driving on dry surface?
The traction control system monitors the steering stability of the vehicle and engages when loss of traction has been detected. This is done by the use of electronic sensors that communicate with the Power Train Control Module (PCM) regarding steering...
Overheating, blow cold air
The heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core (https://www.yourmechanic.com/services/heater-is-not-working-inspection). As you may know, the...
I have a 2006 jeep commander it starts and everything seems fine but when I drive 5-10min it says transmission over temp.
Hello, thank you for writing in. The warning you are getting needs to be verified. There have been issues noted with the transmission temperature sensors and the related system in your particular make and model. These types of issues would...
Browse other content
Maintenance
Cities
Services
When I shift my 2010 Ford F-150 it usually makes real loud popping noise but does shift in 4x4, then it sounds like gears are grinding in there and sometimes even starts to idle funny , but when I shift it back in 2wd it runs norm...
When I shift my 2010 Ford F-150 it usually makes real loud popping noise but does shift in 4x4, then it sounds like gears are grinding in there and sometimes even starts to idle funny , but when I shift it back in 2wd it runs normal, what be causing this? Mechanic's Assistant: How old is the clutch? Has the clutch or its cables ever been replaced? Not that I know of Mechanic's Assistant: Are you fixing your F-150 yourself? What have you tried so far? I haven’t tried fixing it myself yet, I did take it to a mechanic for replaced the actuators Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Not that I can think of