When I'm driving in reverse the car sputters
Responses
Chris (aka- Moose)
289 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
- Is reverse usage the only time this occurs?
- Are any warning lights on or flashing?
Customer
289 days ago
Sputters while in reverse and also going forward over 2500rpmcheck [engine](/topics-engine-ford/) light comes and goesI just want to know if could actually be caused by the spark plugs and wires like the dealership says
Chris (aka- Moose)
289 days ago
Thanks for those details.
Yes, faulty spark plugs can be one of the possible causes for what you are experiencing over 2500 RPMs, but that is not the only thing that can be to blame. There could be a [fuel injector](/topics-fuel-injector-ford/), fuel pressure, vacuum leak, MAF sensor, or throttle position sensor concern.
Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose
Chris (aka- Moose)
289 days ago
It's been a couple of days since you replied. I am going to mark your question complete for now. Reply as needed.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What does the Econ mode indicator light mean?
Your car offers a couple of different operating modes. Normal mode is designed for times when you need greater power and performance. However, you can turn on Econ mode to save fuel. When you do, you’ll see the Econ mode...
Car barely moving due to bad wheel bearing.
A bad wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) is a safety concern. I suggest you have your vehicle repaired immediately by a qualified technician. YourMechanic offers certified mechanics who will come right to your location, so you don't have to risk driving your...
AC temp knob won't turn all the way to cold.
Hello. Your blend door is the part of your vehicle that is responsible for blocking off hot or cold air depending on the preference of the driver. The hot or cold knob on your climate control system is connected to...
Cam shaft position sensor
Hi there. The camshaft position sensors (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) are located on the front of your engine on the top under the engine cover. I usually do a complete inspection before replacing these because there are a number of reasons as to...
Car got over heated and won't start
Hi there: Overheating issues can seriously damage the internal combustion engine but also the ancillary electrical parts such as ignition system and starters that help a vehicle start. The only way to pinpoint the exact reason why the engine on...
No reverse and will not down shift.
This may be a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...
Car backfired then stalls. Engine light is on plus the sports driving mode comes on.
Hi there. Check the engine's camshaft position sensor and the Mass Air Flow sensor (MAF). The camshaft position sensor could be damaged or burned up to cause the engine to backfire and stall out. The MAF sensor could be dirty...
Engine light & engine power reduced
Hello, thank you for writing in. The vehicle's warning light needs to be scanned so we can figure out what component may be causing the issue. Use the codes available to direct you to a probable component. If your codes...
Changed rack and pinion on 2013 Dodge Ram 1500 has electric assist steering now isn't working ? The steering fuse is good , is the
You will need to have the steering system scanned and reset the steering angle using an scanner that has the capability to do the programming of the new steering rack to the computer.
Browse other content
Services
Maintenance
When I'm driving in reverse the car sputters Mechanic's Assistant: What is the make/model/year of your car? Ford [Taurus](/topics-taurus/) 2001 Taurus SE Mechanic's Assistant: Are you fixing your Taurus yourself? ...
When I'm driving in reverse the car sputters Mechanic's Assistant: What is the make/model/year of your car? Ford [Taurus](/topics-taurus/) 2001 Taurus SE Mechanic's Assistant: Are you fixing your Taurus yourself? What have you tried so far? The dealership told me to change the [spark plugs](/topics-spark-plug-ford/) and wires but I feel this isn't the cause so I wanted a second opinion Mechanic's Assistant: How many miles are on the Ford? When did you last change the plugs? 68000km, plugs never changed