Im trying to replace the ac belt. On a 2011 f150 3.7 v6. ...
Responses
Customer
336 days ago
Also I immediately turned off the engine when all the warning lights lit up. Then I just cut off the ac belt. Then I started the engine without the ac belt, but made no difference. the truck stalled and the warning lights still lit. Really really upset. What happened. And why is no tentioner in this model !!??.
6Bucs
336 days ago
Hello and thank you for your question. My name is James.
I’m sorry to hear about the trouble you’re having with your f-150. I’ll do my best to help.
Can you tell me what parts you removed to access the belt?
Customer
336 days ago
I removed the filter box with the mass air flow sensor. It was exposed. Once I cleaned it went back to normal. Back to square 1.. which was to replace the wobbling harmonic balancer. And ac belt replacement.
Question how do you adjust the tention on the ac belt because it's way too tight?
6Bucs
336 days ago
There is no adjustment for these stretch belts and they do seem awfully tight when installing them. Confirm that they gave you the correct part number to make sure. They are difficult to install.The best way to install is with zip ties by resting the belt on the ac clutch pulley and looping the other end behind the harmonic balancer, pulling the zip ties tight, then turning the crankshaft with a ratchet.
Customer
336 days ago
That's what did and it was difficult. So what did yesterday was correct. Now I have to buy another ac belt and do it again. Thank you.
6Bucs
336 days ago
the first time I did one at the dealer I assumed something was wrong because it was so tight and difficult. Thank you for using Just Answer
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What is the towing limit?
Your SUV can be equipped to tow at least a modest payload. However, it cannot tow the same amount as a pickup truck. Knowing the load limits is essential. You’ll find detailed information about towing and cargo limits on the...
How do I mute a phone call in a 2012 Hyundai Elantra?
When making a phone call through the Bluetooth system, you can mute your mic. When muted, the person you are speaking to will not be able to hear you, but you will still be able to hear them. To mute...
Overdrive not working
Greetings! You have a 4T65E transmission. A transmission used in the Pontiac Montana and Pontiac Aztek by GM for about 10 years. About 4 years into production they started receiving complaints about no overdrive and no fourth gear. It was...
Blown engine
Check you dipstick to make sure that the proper amount of oil (https://www.yourmechanic.com/article/how-to-check-your-engine-oil) was installed. It's possible that someone forgot to re-fill the engine oil. It could also just be a coincidence that the Check Engine Light came on after...
Car no longer stays on with revving after starting
Hey there, thanks for writing in. Have a mechanic check fuel supply under these circumstances: adequate fuel pressure (fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) operation, clogged fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement), fuel pump relay (https://www.yourmechanic.com/services/fuel-pump-relay-replacement) and fuses (https://www.yourmechanic.com/services/fuse-replacement), etc.). It also sounds like your battery...
Starts off fine and runs, but when I stop if I'm not holding the gas down it cuts off and the battery dies
Hello, thanks for writing in. The issues you are describing can be caused by a few things. A few common causes for stalling are issues with the fuel, ignition, or engine management systems. If any of the components to these...
My brakes lock up once the car is warmed up
The brakes may not be releasing all the pressure if they are partly engaged after using them. This can be caused by a few different problems. Besides the brake calipers (https://www.yourmechanic.com/services/brake-caliper-replacement) sticking or the brake hoses blocking pressure, you may...
I have a 2013 Ford Edge. Every now and then I get a service all Trac light when I'm stopped and ready to turn off engine. Do I n
Hello, thank you for writing in. The traction control system utilizes many inputs from other system to work correctly. This means the issue can be coming from any of those inputs which include the ABS system, or a sensor for...
Does my 2007 Audi A4 Cabriolet have or support CANBUS for steering wheel control of an after market navigation system?
Unfortunately, YourMechanic does not diagnose problems with, repair, or install aftermarket sound systems. I would recommend reaching out to the products manufacturer to determine if it is compatible with your vehicle.
Browse other content
Estimates
Services
Im trying to replace the ac belt. On a 2011 f150 3.7 v6. I cut the belt off and proceeded to slowly angle it in new belt with zip ties. It's just too tight my gut feeling was that it's not right. Than I started the truck then it...
Im trying to replace the ac belt. On a 2011 f150 3.7 v6. I cut the belt off and proceeded to slowly angle it in new belt with zip ties. It's just too tight my gut feeling was that it's not right. Than I started the truck then it stalled. check [engine](/topics-engine-ford/) light came on. also a wrench picture appearredd. Any ideas???