Tire pressure monitor fault warning line Lite sorry

Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call. I’m sorry that you’re having trouble with your vehicle. I will do my best to help you resolve them. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern, so please allow up to 10 minutes for a reply. I appreciate your patience and will provide responses as soon as possible. you want to double check your tire pressure, if it matches whats on the door and you still have a light on its more than likley a tire sensor fault, to know for sure you will need a high level scanner to check the codes, most shops have this tool and can see whats going on. Once you get the codes post them here and I can direct you on troubleshooting or repair options. Thanks for using JustAnswer and letting me help you. I hope I provided what you needed. If you find more help is still needed, let me know by listing out any remaining questions you have on this concern. I hope the remainder of your day is well.

I DNT have a scanner and checked all tires and there all normal and drove for about 15milea and it's still on

ok so you will need to have a shop do a diagnostics on it to figure out the issue or you can buy your own scanner or some autozones and other parts stores have a scanner that can read that

Ok what about in doing the battery for a couple mins. Will that mayb help

it might do a reset you can try pull negative battery cable then positive touch both cable ends together for 1 min and then wait 15 more install positive then negative and start car.

Ok I'll try that first thing n morning

sounds good

Just checking in with you. Please let me know if you liked my answer, or need more help.