It's a Ford mustang none of the lights come on the dash e...
Responses
Chris (aka- Moose)
228 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
- **Is this a 6 or 8 cylinder?**
- **Will a scan tool communicate with the PCM?**
- **Will the [engine](/topics-engine-ford/) at least crank?**
Customer
228 days ago
The engine does crank just doesn't start starter sounds and appears to be working its 6 cylinder and no the ob2 monitor stud the is no codes storedIt acts as if the anti the is stopping from starting
Chris (aka- Moose)
228 days ago
Thanks, \*\*\*\*\* \*\*\*\*\* are no codes, that means the PATS system is not triggered.
With the key in the run position are the radio, HVAC blower, and power windows powered up?
Chris (aka- Moose)
228 days ago
Thanks,
Have you confirmed ignition spark and injector pulse are occurring?
At the CCRM is the light blue/orange wire powered, black wire grounded and both red wires powered when the key is turned on?
Customer
228 days ago
Marie
Chris (aka- Moose)
228 days ago
Hello, Marie
Have you confirmed ignition spark and injector pulse are occurring?
At the CCRM is the light blue/orange wire powered, black wire grounded and both red wires powered when the key is turned on?
Customer
228 days ago
No ignition spark or no fuel
Chris (aka- Moose)
228 days ago
At the CCRM is the light blue/orange wire powered, black wire grounded and both red wires powered when the key is turned on?
Is fuse 34 under the dash good and is it powered with the key on?
At the [ignition coil](/topics-ignition-coil-ford/) is the white/light blue powered with the key on?
Chris (aka- Moose)
228 days ago
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like in my answer. I hope what I can provide does help.
A wiring concern affecting the ability for the Constant control relay module to work correctly is a possible cause for the things you have not working.
Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose
Customer
228 days ago
The car is now running ..thank you..could you plz close my account down
Chris (aka- Moose)
228 days ago
You are welcome.
Customer
228 days ago
Will you be able to close my account down for our what steps do I need to take
Chris (aka- Moose)
228 days ago
I cannot, you have to do that through the website contact us section.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Overdrive not working.
It sounds like you are having an electrical problem that is affecting several systems. These can be tricky to diagnose. Sometimes they can be tied together and fixed with a single repair or several different repairs may need to be...
How do I repair a seat belt pretensioner?
The seat belt pretensioners are important safety features that help your front seat belts protect you during an accident. The pretensioners can only be used one time, so any time your vehicle is involved in an accident, you should have...
Knocking noise from front tire
It would be helpful to know why were the components you mentioned were replaced in the first place. There are a few more components in the front end that could cause this issue. Problems with the sway bar links are...
I feel a solid bump when I hit the brakes
Have the vehicle driven to see if when the brakes are tough when the steering is pulled one way or the other. If it is, the problem is in the brakes or suspension on that side it pulls to. The...
Car won't go forward or reverse
Depending on the symptoms of the vehicle, this may be a transmission problem or a failing axle. Unfortunately, without additional detail as to the specific model of your vehicle, it may be difficult to diagnose without physically inspecting the vehicle....
Previous owner had a fender bender in rear driver's side. The Service Parking Assist light is coming on. What do I need to do?
The Parking Assist warning message may simply mean that the sensors in the rear bumper are dirty, covered by a bumper sticker, or they are damaged. Wipe the sensors with a wet cloth or paper towel. Drive forward at more...
Brake fluid puddle on carpet. Resevior is empty, filled it, and it emptied again
This suggests you have a leak near your brake booster or master cylinder where the rod enters the master cylinder. This may also be related to the clutch master cylinder as well as your car has a clutch master cylinder...
Misfire on cylinder #1
Hello. A flashing check engine light is an indicator that the computer has detected conditions that are harmful to the vehicle's emission system components. Continuing to drive with a flashing check engine light can result in damage to emissions system,...
P0171 and P0170
Hello and thanks for writing in. Code P0170 relates to the computer detecting a fuel trim that is outside of a specified range which could mean that it is either running excessively rich or lean depending on the circumstances. Code...
Browse other content
Cities
Estimates
It's a Ford mustang none of the lights come on the dash except the abs and [brake](/topics-brake-ford/) light in not getting fuel it fire Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? Yes I'm not ...
It's a Ford mustang none of the lights come on the dash except the abs and [brake](/topics-brake-ford/) light in not getting fuel it fire Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? Yes I'm not getting fuel or fire Mechanic's Assistant: What year is your Mustang? 2002 Mechanic's Assistant: Are you fixing your Mustang yourself? What have you tried so far? Yep I've replaced the ccr the pcm and a module in the left rear trunk also note that there is a clicking sound in the abs when I turn car on I don't hear fuel pump could something be sending a signal that keeps my brain from allowing fuel and fire Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? It all started by two speaker wire that were connected to the amp were bouncing around freely and landed on the spare tire the wheel which caused my [starter](/topics-starter-ford/) motor relay fuse to keep blowing