I’m trying to replace the canister purge value solenoid o...


I’m trying to replace the canister purge value solenoid on a 2017 Ford-150 XLT 3.2 liter eco boost. I think I have the correct part, however I can’t seem to locate it on the vehicle. Mechanic's Assistant: Okay, I'll connec...

I’m trying to replace the canister purge value solenoid on a 2017 Ford-150 XLT 3.2 liter eco boost. I think I have the correct part, however I can’t seem to locate it on the vehicle. Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your Subaru XT. Before I do, is there anything else you want him to know? It’s a Ford F-150

Automotive Expert
Hello and welcome to Just Answer. I'm Paul, I will help you with your question today. please give me your vin # so I can get you the exact location of the purge solenoid

1FTEW1EG8HKC12466
Automotive Expert
Stand by just a minute
Automotive Expert
I am attaching the location of the solenoid you must remove the top [engine](/topics-engine-ford/) cover first See below: [https://peapull.com/o/1601575580.pdf](https://peapull.com/o/1601575580.pdf) if your part does not look like this they may have given you the non eco style there are more than one for these but yours looks like the one in the image. If you need more help just reply, and let me know. When you are satisfied with my answer please remember to rate my answer. Positive feedback is also appreciated. Thank you, Paul

I knew that was it. I keep getting the wrong part. Online and when I go to parts stores. I send a pic of it. How do I get the correct one?
Automotive Expert
let me check on the part for you stand by

Customer attachment 10/1/2020 6:08:00 PM
Automotive Expert
yes that is the style that bolts into the intake and is different unfortunately you may need to call the parts department at your local ford dealer to get this one as I don't have an exact listing for the part #

Thanks
Automotive Expert
no problem glad I could help. Paul

What others are asking

Car belts making noise.
There are several bearings in the pulley system that is driven by your serpentine belt. It is not uncommon for them to go bad occasionally and make noise. However it is also possible that your belt may be worn, or...
Shaking issue when accelerating 45-55 and 60-75 and areas between. (2007 Acura TSX manual transmission)
What you are describing does sound like a bad inner C/V joint or joints. Even if the C/V boot is not torn and all the grease thrown out like typically happens with outer C/V boots, inner C/V boots (https://www.yourmechanic.com/services/cv-boot-replacement) can...
Groaning / binding noise when turning the wheels. I put on a used power steering pump from wrecking yard and the sound still is present.
Hi there. The noises that admit when the power steering is moving is the pump. The other parts will not make any noise except for a water swishing noise as the fluid moves from side to side in the steering...
Okay so I got stuck in mud today and was shifting from reverse to 1st trying to wiggle it out and at some points I did rev the eng
Hi there: Sometimes when a vehicle gets stuck in the mud, excessive mud will clog up sensors on the vehicle suspension or engine / transmission that will trigger the check engine light. However, it's also possible that the excessive wheel...
How do I find the button to reset my odometer from trip to actual mileage on my Malibu
Hi there. Most GM vehicles from 2009 to current 2017 models utilize the Driver Information Center. A general introduction to this system can be found by watching this video (https://www.youtube.com/watch?v=GVD8d3w_mgE), but your owner manual in the glove box should provide...
My 2003 Lincoln Ls is shaking I was told its my coils and that there is 8 of them they want to charge me almost 600.00 seems awfu
Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below...
1984 ranger revving high before shifting into gear. Automatic Transmission
This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...
Average cost to replace brakes and rotors on all 4 wheels and rotors on 2014 Porsche paramera
Hi there. That's really hard to figure as it really depends on what components you use and where the services are completed. If OEM parts are used (which is highly recommended for your Porsche Panamera, they can range from $450...