My Check [engine](/topics-engine-ford/) light is on again...

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Hi Chad thank you

Thank you for your reply and that information as this does help me better understand the situation. I’m sorry to hear you are having this problem. I know this can be frustrating. Please give me one moment to type out some info for you. I’ll be right back! A live optional phone call will be automatically offered by JustAnswer, you can accept or if you decide to decline we can continue with text until you feel the live call would be better suited to you. I will try to help you with this here Please tell me more on resetting the software, did they doa recall on the Computer software reflash and now check engine light is on or you took it in, the check engine light was on, they scanned it and clear the fault codes and after you picked up the check engine light came back on ? **Please Let Me Know** **Thank You** **Chad Farhat** **ASE Certified Technician**

They cleared the fault codes and yesterday on my way home from work, the light came on again and the rpms were jumping.

Ok got you ,but what where the fault codes # Clearing them with out checking or fixing the issue will make the light come back after few driving cycles Up and Dow rpm could be Idle air control valve issue ,Baum leaks ectDo you know the codes

They are p073f, p074b, p2832 and p285e.

There is a TSB bulletin on this code P073f ,this one is casuing the other fault as well there is a software update on pcm and tcm, dealer did not do that for you it will not be free,clearing codes will come back with out please read below TSB 14-0200 10/31/14 DIAGNOSTIC TROUBLE CODE (DTC) P073E OR P073F PRESENT OR STORED IN MEMORY - BUILT ON OR BEFORE 9/27/2014 FORD: 2014 Focus ISSUE Some 2014 Focus vehicles equipped with a DPS6 [automatic transmission](https://my.alldata.com/repair/#/repair/vehicle/53266/component/844/filter/) and built on or before 9/27/2014 may exhibit a slight bump or jerk while driving. The automatic [transmission](/topics-transmission-ford/) indicator lamp may also be illuminated with DTC P073E or P073F stored or present in the [transmission control module](https://my.alldata.com/repair/#/repair/vehicle/53266/component/421/filter/) ([TCM](https://my.alldata.com/repair/#/repair/vehicle/53266/component/421/filter/)). ACTION Follow the Service Procedure steps to correct the condition. SERVICE PROCEDURE 1.Using Ford Integrated Diagnostic System (IDS) service tool or equivalent, check for DTCs in the TCM. Are DTC P073E or P073F present in the TCM? a. Yes - proceed to Step 2. b. No - this article does not apply, refer to Workshop Manual (WSM), Section 307-01 for normal diagnosis. 2. **NOTE** : THE [PCM](https://my.alldata.com/repair/#/repair/vehicle/53266/component/421/filter/) AND TCM ARE A MATCHED SET. PROGRAMMING THE PCM AUTOMATICALLY UPDATES THE TCM. Reprogram the [powertrain control module](https://my.alldata.com/repair/#/repair/vehicle/53266/component/421/filter/) (PCM) to the latest calibration level using IDS release 92.04 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at the website. 3. **NOTE** : TRANSMISSION ADAPTIVE LEARNING NO LONGER REQUIRES AN ADAPTIVE DRIVE TO RESET THE [CLUTCH](https://my.alldata.com/repair/#/repair/vehicle/53266/component/843/filter/) ENGAGEMENT POINTS. Using IDS service tool or equivalent, select Powertrain, Transmission, Transmission Adaptive Learning and perform the Clutch Adaptive Learning. If you have any follow up questions, please let me know using the reply button. If you are satisfied with my help, please let me know so we can complete your question. Thank You Chad Farhat ASE Certified Technician

Thank you.

Please Read Below How to Get Back in touch with Me You Can Always Come Back to this Conversation and Ask Me any Follow up Question you May have on this Issue (You can Copy this Link Page & Paste it in your Browser when Ready and it will Open up our Conversation Again) or there should be a Tab on your Screen to Add me As Your Favorite Expert I'm Online Daily from 7 Am Till Late Eastern Time Zone Thank You?Chad Farhat?ASE Certified Technician You are very Welcome If you need my assistance in the future, Start your Question with (FOR CHAD FARHAT ONLY) or Go to my profile page You can also add me as Favorite expert for any future questions [http://www.justanswer.com/car/expert-chadfarhat/?rpt=3800](//www.justanswer.com/car/expert-chadfarhat/?rpt=3800)