I have 2009 Ford police inceptor... My check [engine](/to...
Customer
I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery...
I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery post... Drove it for 2 days the check engine light came back on... Check the code purge valve.... Do I need to re set it a different way??
Mechanic's Assistant: Does the light stay on, or does it blink?
Stays on no blinking
Mechanic's Assistant: What is the model of your '09 Ford?
Police inceptor
Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far?
Me an my friend... I went to AutoZone they said did you reset the car properly.... So on my car you have to turn the ignition key on but don't start the car.... Leave the positive battery post on take off the negative post for about 5 minutes.. reattaching negative post start the car up and that's how you should reset it the check engine light went off..... But I don't know if it's going to come back on after driving it for a while
Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you?
That's it
Read More
Responses
Mike S.
235 days ago
Automotive Expert
Greetings. I work here helping customers like you repair their vehicle. Let’s begin with a diagnosis, plan and repair that will save you money.
Give me the actual code and then I will get you their troubleshooting procedure from the repair manual.
Mike S.
235 days ago
Automotive Expert
Let me know if there is anything further that you need on this topic.
Thanks for visiting justanswer.com and good luck with your repairs!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
I agree that technology breeds a love and hate relationship, my advice is to concentrate on the loving and leave the hate behind. The issue with your vehicle may be a somewhat straightforward repair. GMC is aware of a corrosion...
Hello. It may very well be that there is a leak in the radiator, but it is also possible that there is a leak in another area of the coolant system. All of the radiator hoses, as well as the...
The VANOS unit or solenoid can cause a rattling sound from the engine. The VANOS is a camshaft timing system which runs off of engine oil pressure. If the oil is the wrong viscosity or the system has a buildup...
Hello there, a few different faults will cause your 2001 Pontiac Grand Am to start and then die. Replacing the battery was a good start, as it can cause this type of issues. Other possible faults include the MAF sensor...
Depending on the model of Saturn that you have, the vehicle may have electric power steering. If the vehicle has electric power steering, it is possible that an electrical fault may exist. This fault could be located in the relay,...
The starter on the truck may have burned out from the repeated jumping of the weak battery. This will cause the voltage to the starter to be low and overheat the starter when you try to turn it over multiple...
It sounds like you have excessive crankcase pressure as though the PCV valve (https://www.yourmechanic.com/services/positive-crankcase-ventilation-pcv-valve-replacement) was clogged ("throws oil out the oil filler tube"). Check the PCV valve and other crankcase ventilation hoses (to the throttle body and air intake). The...
The problem sounds like you have flat spots on the tires in the rear when the tow truck operator dragged and pushed the truck with the transmission locked. I would recommend having a vehicle safety inspection (https://www.yourmechanic.com/services/75-point-safety-inspection) to see if...
Hello. It sounds like you have an issue with the suspension of the vehicle. Most of the time when this occurs it is caused by worn out suspension bushings or ball joints. These areas move and flex when going over...
I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery...
I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery post... Drove it for 2 days the check engine light came back on... Check the code purge valve.... Do I need to re set it a different way?? Mechanic's Assistant: Does the light stay on, or does it blink? Stays on no blinking Mechanic's Assistant: What is the model of your '09 Ford? Police inceptor Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Me an my friend... I went to AutoZone they said did you reset the car properly.... So on my car you have to turn the ignition key on but don't start the car.... Leave the positive battery post on take off the negative post for about 5 minutes.. reattaching negative post start the car up and that's how you should reset it the check engine light went off..... But I don't know if it's going to come back on after driving it for a while Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? That's it