I replace my transmission but it's not going into gear


I replace my transmission but it's not going into gear Mechanic's Assistant: Have you checked the level of your transmission fluid? Is it bright red, or is it dirty? I put brand new transmission fluid and filter Mecha...

I replace my transmission but it's not going into gear Mechanic's Assistant: Have you checked the level of your transmission fluid? Is it bright red, or is it dirty? I put brand new transmission fluid and filter Mechanic's Assistant: What is the make/model/year of your transmissions? Chevy suburban 02 Mechanic's Assistant: What year is your Chevy? 2002 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Check all connections, checked fluid, checked filter, but it still doesn't move Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Miss a full l60e and I got it out of a wrecked vehicle

Automotive Expert
Welcome to Just Answer I'm Chris aka Moose, I'm sorry you are having problems with your Suburban. I will do my best to help you get this resolved. If I happen to be helping another or step away during our communication, please know I will follow up as soon as I am back available/online. I try to be online for about 10+ hours a day, midday and late-night shift. - Do you have a pressure gauge so we can do a line pressure test on each gear?

Sorry I do not have one
Automotive Expert
Does this remanufactured transmission you installed, come with a warranty?

No
Automotive Expert
Thanks, It may be best to let a transmission shop diagnose this since you do not have the tools needed. If it is full of fluid, the shift cable is adjusted correctly, all connectors are plugged up. It should at least engage into D and R if there are no concerns internal with the pump and clutches. We need to know if the pump is doing its job by doing a pressure test prior to taking the trans apart starting with the valve body. Thank you for visiting Just Answer, I hope I was able to answer your question. If you need to follow up on this concern please use the reply button. If you like my answer please reply so I can mark your question complete. Moose

What is the name of the pressure tool that I would need to get
Automotive Expert
[https://www.harborfreight.com/engine-oil-pressure-test-kit-62621.html](https://www.harborfreight.com/engine-oil-pressure-test-kit-62621.html)

Ok I'm going to get it Friday, which line do I tie into the high or low
Automotive Expert
[https://www.dropbox.com/s/g9g6fprpjrptk3s/4L60pressure.pdf?dl=0](https://www.dropbox.com/s/g9g6fprpjrptk3s/4L60pressure.pdf?dl=0)

Customer attachment 8/26/2020 8:39:37 PM
Automotive Expert
If you are on an Android phone or work computer. They can block files from being able to open and or not have Adobe PDF reader on the device. Try opening the file on a computer with Adobe or through the emails you are receiving or from a tablet.

Got itI don't understand the chart, I see 5.3L but what pressure I need
Automotive Expert
See step 3. The chart only applies to the pressure readings when you are commanding the pressure control solenoid shown in step 4.

Customer attachment 8/27/2020 9:20:33 PM
Automotive Expert
A compression tester is for air pressure, not hydraulic pressure and it will not have the attachments you need.

I need to go back
Automotive Expert
Okay

Customer attachment 8/27/2020 11:52:25 PM
Automotive Expert
That should work.

What all can I ask about my truck

I connected the line to the port on the Driver side and it's hasn't moved
Automotive Expert
So you are saying it is showing there is no line pressure being made by the pump in any gear?
Automotive Expert
No line pressure can mean: - low on transmission oil - The pump is cavitating from the filter not being secure or it is cracked - faulty pump - cracked pump - pressure control valve stuck open and venting all made pressure right back into the pan. The transmission needs to be removed and taken apart to inspect, repair, and overhaul.

Ok
Automotive Expert
Glad to help

What others are asking

Loud idling, clunking, vibrating when stopping, sluggish engine
It sounds like you may have a faulty engine or transmission mount. These mounts are what secures the engine or transmission to the frame of the vehicle. These mounts are made of metal frames with large solid pieces of rubber...
What may cause my car to not crank
Hi there. It sounds like you have an issue either the ignition switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-switch) or the clutch switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-clutch-switch). If either of these fail it will cause the starter to not get voltage. Most of the time it is caused...
Reduced engine power
Code P0120 (https://www.yourmechanic.com/article/p0120-obd-ii-trouble-code-tps-a-circuit-malfunction-by-jay-safford) relates to the throttle position sensor and can be caused by the following: Sticking throttle return spring MAP or TPS connector corrosion Misrouted harness causing chafing Bad TPS Bad PCM Code P0220 (https://www.yourmechanic.com/article/p0220-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-circuit-b-malfunction-by-andrew-quinn) relates to the throttle...
Check engine light and fuel cap stay on.
Hi there: In most newer trucks, like your 2014 Ram, if an error light is triggered and the repairs are made, you'll have to clear those stored error codes in the ECU with a digital scanner or they will stay...
My car drives in 1 and 2 but does not drive in d.. it does go into reverse Chevy Tahoe
Hello - most likely problem for this "no go (https://www.yourmechanic.com/question/when-it-turns-on-it-does-not-move-forward-but-does-move-in-reverse-easily-by-joseph)" condition is a failure of the forward sprag (a one-way clutch) in the transmission. I would recommend a transmission inspection (https://www.yourmechanic.com/services/gears-slipping-when-accelerating-inspection) by a mobile, professional mechanic, such as one from...
Why would my clutch pedal be stuck on the floor in my 1999 Honda Civic
Hello. The most common cause of a clutch pedal not returning to its upright position is a bad clutch master cylinder. When it fails internally it will no longer hold pressure which keeps it from returning up. It can also...
Tapping noise when under a load.
Hi there. The sound that you provided for the tapping noise sounds as if your engine is dieseling when operating. This is a noise that occurs when the engine is either running too hot or has too much carbon on...
2002 Nissan Sentra GXE is smoking out the tail pipe. I replace a knock sensor and the code for the knock sensor still pops up.
HI there. There are different symptoms that create smoke that emits from the tail pipe. Here is a description of the different smoke for you to check: Smoke Types Blue: Blue smoke is an indication that the engine is burning...
will 2003 Saab 93 convertible ecu shut off engine if low oil pressre, some articles say yes some say no.,
Your vehicle will not shut down automatically if oil pressure or the level of oil is low. The owner's manual (http://www.vadengmpp.com/owners-manual/saab/2003-Saab-9-3M.pdf) states that the vehicle must be turned off manually (and quickly) if either circumstance occurs. Please note, the instant...