I just replaced my shift interlock solenoid and and the c...


I just replaced my shift interlock solenoid and and the car is still staying in park does the brake light switch interact with the shaft interlock solenoid Mechanic's Assistant: Have you checked the brake fluid? How's the ...

I just replaced my shift interlock solenoid and and the car is still staying in park does the brake light switch interact with the shaft interlock solenoid Mechanic's Assistant: Have you checked the brake fluid? How's the level and when was it last changed? I just had front pads and rotors and they added fluid but the fluid level is okay Mechanic's Assistant: What is the make/model/year of your car? 2007 Chevy Silverado two-wheel drive Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I just replaced the shaft interlock solenoid Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Yeah how can I get it out of park even though I just changed the shaft interlock solenoid

Automotive Expert
Hi there, yes the brake light switch is directly involved in the interlock. Check to see if your [brakes](/topics-brakes/) work first. Brake lights.

I checked the brakes the brake lights come on the [turn signal](/topics-turn-signal/) comes on and the lights are not on even when I turn the vehicle offI do have brake lights
Automotive Expert
In this case, not very common. I would start by locating the actual shift lock solenoid and testing for power and ground then we can work from there. It is in the column with tan/whit and black wires. You can usually manually move it and make sure you can shift it properly.

I just replace the solenoid and when I go to put it in drive it's still not moving
Automotive Expert
We need to find out if we are missing power or ground to the solenoid then we can diagnose from there. Test with a test light and unplugged and let me know what is missing. Black is ground.

OkayI checked it but the test like and it's getting power
Automotive Expert
SO that power should come on and off with the brake pedal being depressed. Is the ground there? (Black wire)
Automotive Expert
If power and ground is there it has to be working.

I have been running I stepped on the brake pedal . It's shifting but not going into gear
Automotive Expert
So you can move the lever into drive?
Automotive Expert
Ok, we do not have an interlock issue then. Is it saying it is going into drive on the instrument cluster?

NoI'm actually in the truck with it running and I have it in drive and when I hit the accelerator is not moving
Automotive Expert
On the dash it says it is still in park?

When I shifted to drive it'll say it's in drive but won't move
Automotive Expert
Ok we have a transmission issue then. Check the transmission fluid level.

Okay checked it and it is at level
Automotive Expert
Unfortunately something is wring in the transmission and will have to see a shop.

Thanks anyway
Automotive Expert
You are welcome, Good Luck.

What others are asking

My car won't shift gears
Hi there. When this transmission starts sticking in gear like this it is typically the first sign of an internal transmission failure. The solenoid pack should not have to be installed prior to checking the transmission pressures to see if...
Stuck oil filter
Hi, thanks for writing in. Try using a large screw driver and drive it into the filter at the end, then use it as a lever to turn the filter. If this does not work, then a three-finger style filter...
1993 Ford F150 4.9 straight 6 fuel pump keeps running, won't start, replaced relay and fuel pressure regulator, still having the same problem
Hi, thanks for writing in. You need to have the fuel pressure checked to see if the pressure is low. The fuel pump inlet screen may be getting clogged causing the pressure to drop off but the pump will continue...
Air bag light comes on intermittently on newly purchased car.
Hello. The seats have sensors in them that tells the computer that someone is in the passenger seat and some vehicles will even sense how heavy that person is to adjust the air bag deployment force. You may have a...
Engine cranks but wont run. Power not reaching fuel pump
This sounds like you may not have any power going to the fuel pump relay (https://www.yourmechanic.com/services/fuel-pump-relay-replacement). The relay wires should have ground on two wires, power on one wire and switched power on another wire. To activate the fuel pump...
WHAT KIND OF MOTOR OIL DO I USE AND HOW MANY QUARTS ?
The V6-3.0L Turbo is diesel powered. If that is the vehicle that you have, the oil capacity is 6.8 quarts assuming you install a new filter and, of course, you should use a new filter. In all events, check the...
Oil leaking from top left side of engine, could that be the vavle cover gasket?
Oil leaks at the top of engine could be at valve covers, intake manifolds, head gaskets, cam seals, PCV valve grommets and tubing and related components. The best thing to do, to get the source of the leak identified, is...
I've been told I have 2 thermostats on my 2013 Chrysler 200 touring?
There are two separate thermostats in your application, a primary and a secondary. The primary and secondary thermostats have different temperature profiles in terms of their opening temperature because they are located on different areas of the engine. The primary...
How important are rear sway bar links ?
Rear sway bars are to help the rear of the vehicle to be stable when driving around turns or maneuvers and when towing another vehicle. The sway bar should not affect the vehicle when hitting bumps unless the links or...